Atx Power - SOYO SY-6BB User Manual

Quick Installation Guide
SY-6BB
Step 11. AGP VGA Card
Insert the AGP VGA card into the AGP slot. Then connect the
monitor information cable to the AGP card back plane external
connector.
Follow the manufacturer's instructions to perform the AGP VGA
drivers installation.
Other Display Cards: Insert other types of VGA cards into the PCI
or ISA expansion slots according to card specifications.
Step 12. PCI Audio Card
Some soundcards require a DMA channel. Attach the 5-pin cable
from the PCI Audio card to the SB-LINK ™ connector on the
motherboard. The SB-LINK ™ will forward requests for legacy DMA
channel to the PCI Bus.
Step 13. ATX Power Supply
If you are using ATX power, plug the connector from the power
source directly into the 20-pin male ATX PW connector on the
motherboard, as shown in the following figure.

ATX Power

20