Opening And Closing The Casing For Service Or System Expansion; Opening The Casing - Fujitsu Siemens Computers AMILO Desktop S Series First-Time Setup

Operation
Opening and closing the casing for service
or system expansion

Opening the casing

Machine Casing,
Note that various of the components on the motherboard can be still very hot if the
machine had been in use a short while previously.
These components can be identified by the following symbol.
► Switch the machine off. Make sure the machine is off, and not in power-saving mode!
Comply with the safety information in the "Safety" manual and in the
operating instructions for the "AMILO Desktop".
Unplug the mains plug from the mains socket.
Don't plug the mains plug back into the mains socket until you have
closed the casing up again.
► Disconnect any cables that make access difficult.
1
1
1
► Using a cross-head screwdriver (1), unscrew the casing screws.
► Place the machine on its side as shown.
► Push the side panel in the direction of the arrow (2).
► Swing the side panel in the direction of the arrow (3) and lift it off the casing.
20 - English
3
2
10600985317, edition 1