Connecting Devices; Notes On Standard Units - Fujitsu Siemens Computers JETSON Operating Manual

Connecting devices

Connecting devices
Read the documentation on the external device before connecting it. When you set up the
i
PC for the first time, connect only the monitor, the keyboard and the mouse.

Notes on standard units

The notes in this section do not apply to units with a USB port and not to the LAN connection.
The power plug must be disconnected!
!
Do not connect or disconnect cables during a thunderstorm (electric shock).
Always take hold of the actual plug body. Do not pull the cable (you could damage the
plug or socket)!
Connect and disconnect the cables in the order described below.
Connecting cables
•
Turn off all power and equipment switches.
•
Unplug all power plugs from the grounded power outlets.
•
Connect all cables at the system unit and peripherals. You must observe the information
provided in the chapter "Important notes".
•
Plug all data communication cables into the utility sockets.
•
Plug all power cables into the grounded power outlets.
Disconnecting cables
•
Turn off all power and equipment switches.
•
Unplug all power plugs from the grounded power outlets.
•
Unplug all data communication cables from the utility sockets.
•
Disconnect all cables from the system unit and peripherals.
A26361-K619-Z100-1-7619
Preparation for use and operation
9