C a u t i o n
To update the OmniBook BIOS
Hewlett-Packard may update the BIOS to enhance the capabilities of the OmniBook.
Updates will be available from HP Electronic Support Services.
Because a BIOS update replaces the previous version, it is very important you follow
these instructions exactly. Otherwise, you may damage the OmniBook.
1.
From the Start menu, shut down the OmniBook.
2.
Connect the ac adapter to the OmniBook.
3.
Remove any PC Cards.
4.
Insert the BIOS Update disk in the floppy disk drive.
5.
Press the power button.
6.
When prompted, press C. This starts a process that takes approximately 1
minute.
7.
When prompted, press the system-off button.
Do not interrupt the update process.
Using the Recovery CD
Recovering OmniBook Files
5-7