Making Connections
Using Floppy Disk and CD-ROM Drives
To use the CD-ROM drive safely
• If the unit requires service, contact an authorized HP service center—see the
OmniBook Support and Service booklet.
• Do not attempt to make any adjustment to the unit.
• Avoid direct exposure to the laser beam.
• Be sure to fully seat the CD on the spindle.
To open the CD-ROM drive manually
If you lose power to the OmniBook, or if you have removed the OmniBook from the
multimedia expansion slice, you can manually open the CD-ROM drive to remove a
CD.
• Insert a straightened paper clip into the small hole, as shown.
4-8