HP OmniBook Sojourn User Manual page 21

Advanced Menu
I/O Device Configuration
Serial Port A
Serial Port B
(Infrared Port)
Mode
Parallel Port
Mode
Floppy Disk Controller
Large Disk Access Mode
Local Bus IDE adapter
Security Menu
User Password Is
Supervisor Password Is
Set User Password
Set Supervisor Password
Password on Boot
Diskette Access
Fixed Disk Boot Sector
Configuring the OmniBook with Setup
Description
Configures serial port A
Configures infrared port.
Set mode (Normal, IrDA, ASK-IR, or
FIR) for infrared port (Serial Port B).
Configures parallel port.
Sets mode (Output Only, bidirectional,
ECP, or EPP) for parallel port.
Configures floppy disk controller.
UNIX, Novell Netware, or other
operating systems, select "Other."
Enables local bus IDE adapter.
Description
Shows if a user password is set.
Shows if a supervisor password is set.
Press ENTER to set, change, or clear
the password and save all Setup
changes. (Up to 8 alphanumeric keys).
Press ENTER to set, change, or clear
the password and save changes
Required a password to boot.
Restricts floppy drive use to
supervisor. Requires setting
Supervisor password and enabling
Password On Boot.
Write protects boot sector on hard
disk to protect against viruses.
Introducing the OmniBook
Default
Auto
Disabled
Normal
Auto
Bidirectional
Enabled
DOS
Both
Default
Clear
Clear
Disabled
User
Normal
1-13