Remote Controller; Controlling The Av Receiver - Integra DTR-50.5 Instruction Manual

Remote Controller

Controlling the AV Receiver

To control the AV receiver, press Receiver to select
Receiver mode.
*2
*2
*1
Receiver
For detailed information, see the pages in
parentheses.
Receiver button (22)
Activities buttons (52, 90)
Remote Mode/Input Selector buttons (30)
SP (speaker layout) button (51)
/ / / and Enter buttons
Q Setup button (54)
Listening Mode buttons (42)
Dimmer button (50)
Display button (50)
Muting button (51)
*2
VOL / button (30)
*2
Return button
Home button (53)
Sleep button (50)
Tip
• You can also use the remote controller to control Integra/
Onkyo Blu-ray Disc/DVD player, CD player, and other
components.
See "Entering Remote Control Codes" for more details
(➔ page 82).
En-10
Safety Information and Introduction
■
Controlling the tuner
To control the AV receiver's tuner, press Tuner (or
Receiver).
You can select AM or FM by pressing Tuner
repeatedly.
/ buttons (39)
D.TUN button (39)
Display button
CH +/– button (40)
Number buttons (39)
*1 When you want to change the remote controller mode
(target component) without changing the current input
source, press Mode and within about 8 seconds, press
Remote Mode. Then, using the same AV receiver's
remote controller, you can control the component
corresponding to the button you pressed.
*2 These buttons can also be used when a Remote Mode
other than Receiver mode is selected.