Remote Controller - Integra DRX-2.3 Instruction Manual

Remote Controller











Contents
≫
1. On/Standby button

2. Input selector buttons: Switches the input to be played.
3. Play buttons: Used for playback operations for the Music Server (

or USB device (
"19. Mode button" , an HDMI CEC function-enabled AV component can be
operated. (Depending on the device, operation may not be possible.)
4. Q (Quick Menu) button: Pressing this button during playback can make settings
such as "Tone" and "Level" quickly on the TV screen while playing. (
5. Cursor buttons and Enter button: Select an item with the cursors, and press
Enter to confirm your selection. Pressing
music folder list or file list is not displayed on one screen on the TV.
6. button: Display advanced setting items on the TV or the display to have a

more enjoyable experience with this unit. (
7. Tone button: Adjusts the sound quality. (
8. Listening Mode button: Select a listening mode (
9. Dimmer button: Switches the brightness of the display with three levels. It
cannot be turned off completely.
10. Zone 2 Shift button: Control the multi-zone function (
Shift button cannot be used with this unit.)

11. Sleep button: Set the sleep timer. Select the time from "30 min", "60 min" and
"90 min". (

12. HDMI Main/Sub button: Select the HDMI OUT jack to output video signals
from "MAIN", "SUB", and "MAIN+SUB".

13. button: Switches the information on the display and is used to operate RDS
( p73). Also, when the "BLUETOOTH" input selector is selected, pressing
and holding this button for 5 seconds or more will switch to the pairing mode.
14. button: Returns the display to the previous state while setting.

15. button: Temporarily mutes audio. Press the button again to cancel muting.
16. VOLUME buttons

17. Clear button: Deletes all characters you have entered when entering text on
the TV screen.

18. Memory button: Used to register AM/FM radio stations. (
19. Mode button: Switches between automatic tuning and manual tuning for
AM/FM stations (
component is connected to this unit, you can switch "3. Play buttons" between
"CEC MODE" and "RCV MODE" (normal mode).
15
Connections Playback
≫
p56). If the unit is switched to "CEC MODE" using
p79)
p69). Also, when an HDMI CEC function-enabled AV
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫
p59)
p129)
/ can switch the screen when a
p101)
p78)
p80).
p74). (The Zone 3
p71)
≫