Integra DTR-5.1 Instruction Manual
  1. Manuals
  2. Brands
  3. Integra Manuals
  4. Receiver
  5. DTR-5.1
  6. Instruction manual
Integra DTR-5.1 Instruction Manual

Integra DTR-5.1 Instruction Manual

Integra av receiver instruction manual
Hide thumbs Also See for DTR-5.1:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
AV Receiver
DTR-5.1
Instruction Manual
Thank you for purchasing the Integra AV Receiver.
Please read this manual thoroughly before
making connections and turning on the power.
Following the instructions in this manual will
enable you to obtain optimum performance
and listening enjoyment from your new AV
Receiver.
Please retain this manual for future reference.
Contents
Before using
Important Safeguards ................... 2
Precautions..................................... 3
Features .......................................... 4
Supplied accessories..................... 4
Preparation
Connecting speakers .................. 10
Positioning speakers .................... 11
Connecting the power ............... 11
Operation
Speaker setup .............................. 14
Using Listening Mode................... 21
Tuning in a radio station.............. 24
Recording a source..................... 27
in the Sub-room......................... 29
Using a Macro function............... 36
Appendix
Troubleshooting guide ................ 40
Specifications ............................... 41
Control guide

Advertisement

Table of Contents
loading

Related Manuals for Integra DTR-5.1

Summary of Contents for Integra DTR-5.1

  • Page 1: Table Of Contents

    AV Receiver DTR-5.1 Instruction Manual Thank you for purchasing the Integra AV Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.

  • Page 2: Important Safeguards

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

  • Page 3: Precautions

    Precautions 1. Warranty Claim You can find the serial number on the rear panel of this unit. In case of warranty claim, please report this num- ber. 2. Recording Copyright Recording of copyrighted material for other than per- sonal use is illegal without permission of the copyright holder.

  • Page 4: Features

    Features ®*1 ®*2 , Dolby Digital and Dolby Decoders 5.1 Channel Direct Inputs Cinema Re-EQ™ Circuitry High Definition DSP 8 DSP Listening Modes Full Bandwidth Power to 5 Main Channels Wide Range Amplifier Technology (WRAT) High-Current, Low-Impedance 6-Ohm Drive Discrete Output Stage Circuitry for 5 Main Channels Massive Isolated Transformer High-Quality Aluminum-Extruded Heat Sinks Blue Power Supply Capacitors...

  • Page 5: Before Operating This Unit

    Using the remote controller Point the remote controller toward the remote control sensor. The Standby indicator lights up when the unit receives a DTR-5.1 signal from the remote controller. Notes Place the unit away from strong light such as direct sun- light or inverted fluorescent light which can prevent...

  • Page 6: Audio Equipment Connections

    REMOTE CONTROL AC INLET AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AV RECEIVER DTR-5.1 Power cable (included) : signal flow See page 9 Do not plug in the power cable until all connections have been made. To wall...

  • Page 7: Video Equipment Connections

    COAXIAL 1 FRONT SPEAKERS OPTICAL 2 OPTICAL 1 CENTER SPEAKER FRONT SURROUND AV RECEIVER MODEL NO. DTR-5.1 CENTER WOOFER MULT I CH I NPUT S-VIDEO IN S-VIDEO OUT VIDEO IN S-VIDEO IN VIDEO IN Monitor TV Audio connection cable L (Left)

  • Page 8: Connecting Other Devices

    Monaural audio cable (mono) SUBWOOFER OUT CENTER OUT FRONT OUT DIGITAL INPUT FRONT SURROUND COAXIAL 2 SPEAKERS SPEAKERS COAXIAL 1 OPTICAL 2 OPTICAL 1 REMOTE CONTROL AC INLET AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AV RECEIVER DTR-5.1 MODEL NO.
  • Page 9 Note: Do not use any power cable other than the included cable. The included cable is designed for use only with the DTR-5.1. Do not use it for any other device. Do not connect or disconnect the out- let plug from the DTR-5.1 while the other end is plugged into the wall AC outlet.

  • Page 10: Connecting Speakers

    COAXIAL 1 OPTICAL 2 OPTICAL 1 REMOTE CONTROL AC INLET AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AV RECEIVER DTR-5.1 – R ch. Surround Speakers + – – + 4. Screw. – L ch. + – – +...

  • Page 11: Positioning Speakers

    Standby mode. 3. STNBY button Turning the power on from the remote controller: 1. Press the Power switch of the DTR-5.1 to turn on the power to the unit. 2. Press the MODE AUDIO button. 3. Press the On button to turn on the power to the DTR- 5.1, or press the STNBY button to set the receiver in...

  • Page 12: Making Antenna Connections

    Making antenna connections Insert into the hole. ANTENNA Assembling the AM loop antenna Assemble the loop antenna as shown in the illustration. Refer to the next page for details on connecting the AM loop antenna. Connecting the antenna cable 1. Press down the lever. 2.
  • Page 13 Making antenna connections ANTENNA ANTENNA Directional linkage type splitter To DTR-5.1 Connecting an FM outdoor antenna Please make sure that you follow the considerations below regarding the location. Keep the antenna away from noise sources (neon signs, busy roads, etc.).

  • Page 14: Speaker Setup

    Speaker setup Follow the steps below before you start operating the unit. SP/SYS Setup Enter Enter Preset/Mode ADJ Down Preset/Mode ADJ Down Enter button SP SYS/Setup button Dimmer SP/SYS Setup CH Level Mode Display Preset/Mode ADJ √/® button Setting the CONFIG parameters Set whether a speaker is used or not, and set the size of the connected speakers.
  • Page 15 Speaker setup Preset/Mode ADJ Down Preset/Mode ADJ Down SP/SYS Setup Enter SP/SYS Setup Enter meter Preset/Mode ADJ Down Preset/Mode ADJ Down Preset/Mode ADJ Down 4. Select the size of the center speaker. Pressing the Preset/Mode ADJ √/® buttons switches among “LARGE,” “SMALL,” and “NONE.” Note: If you have selected “SMALL”...
  • Page 16 Speaker setup 3. CH SEL button Using the Test Tone function on the main unit 1. Press the SP/SYS Setup button. 2. Press the Enter button while “SPEAKER SETUP” appears on the display. 3. Press the SP/SYS Setup button twice while “CONFIG SETUP” appears on the display. 4.

  • Page 17: Selecting A Sound Source

    Selecting a sound source Follow the steps below to select a device to play the sound source. 2. Make sure that the Speakers A indicator is lit on the display. If it is not lit, press the Speakers A button. (Refer to the “Speakers selector”...
  • Page 18 Assigning the digital input COAXIAL 2 If another device is connected to the digital input jack of the DTR-5.1, assign the digital input to DVD, CD, COAXIAL 1 VIDEO 1, VIDEO 2, VIDEO 3, or TAPE depending on the type of connected device. Follow the steps (1–4) below.
  • Page 19 Selecting a sound source HOME THEATER CONTROLLER RC-424M LEFT CENTER SUBWOOFER L-SURROUND SP/SYS Setup Enter Preset/Mode ADJ Down Master Volume When Multi channel input is selected as a source Follow the steps below to adjust the level of each speaker if you have selected Multi CH Input. 1.
  • Page 20 Selecting a sound source Speakers selector (Speakers A, B) Speakers A: This button turns on or off the speakers con- nected to the FRONT SPEAKERS A, CENTER SPEAKER, SURROUND SPEAKERS and SUBWOOFER terminals. When you select Surround mode or Multi CH INPUT, be sure to turn on Speakers A.

  • Page 21: Using Listening Mode

    DTS source, a short noise may be heard. This is not a malfunction. 4. The DTS indicator on the DTR-5.1 lights up while it plays the DTS source. When playback concludes and the DTS signal transmission stops, the DTR-5.1 remains in DTS mode and the DTS indicator remains lit.
  • Page 22 To play a Dolby digital or DTS Surround source, you need to connect the sound source using the digital input connector. When you play the Dolby Digital or DTS Surround source, the DTR-5.1 automatically enters Dolby Digital Surround (stereo) or DTS Surround (stereo) mode respectively. 1. Press the MODE...
  • Page 23 Using Listening Mode Main unit operation: 1. Press the CH Level button. 2. Press the Preset/Mode ADJ √/® buttons to adjust the level. 3. Press the Enter button to select a speaker. Setting the Listening mode parameters The following parameters are available for each Listening mode. Dolby Digital LATE NIGHT FRONT EFFECT...

  • Page 24: Tuning In A Radio Station

    Tuning in a radio station Down Tuning FM Mode Display FM Mode Tuning Down/Up Digital/ SP/SYS Standby/On Dimmer Memory FM Mode Down Tuning Analog Setup CH Level Mode Preset/Mode ADJ Down Standby Power Enter O f f Speakers Listening Mode Late Night/ LFE Level Display...

  • Page 25: Using Preset Radio Stations

    Using preset radio stations FM Mode Memory Standby/On Dimmer Standby Power O f f Speakers Display Stereo /DTS Surround Phones Multi CH Video 1 Video 2 Video 3 Input Memory Enter Preset/Mode ADJ Down Enter Tuning Down/Up Preset/Mode ADJ MODE AUDIO Digital/ SP/SYS Memory...
  • Page 26 Using preset radio stations 1, 2 Remote controller Memory Enter Selecting a preset station Preset/Mode ADJ Down 1. Select the tuner as the source by pressing the AM or 2. Enter the desired preset number using the Preset/ Remote controller operation Remote controller 1.

  • Page 27: Recording A Source

    Recording a source You can record analog Audio, but not digital audio. Make sure that you have made a correct analog connection. You cannot record the source connected to MULTI CH INPUT jack. If you select another device as the input source during recording, the input signal from that device will be recorded.
  • Page 28 Recording a source Standby/On Dimmer Standby Power O f f Speakers Display Stereo Phones Video 1 Multi CH Video 2 Input 1·5 VDP, VCR, DVD (Video 2, Video 3) 2·5 VCR (Video 1) Video 2 Tape Digital/ SP/SYS Memory FM Mode Down Tuning Analog...

  • Page 29: Enjoying Music And Movies In The Sub-Room

    If you connect Onkyo Multi-room Remote System components as shown in the figure below, you can control the components from an adjacent sub-room as well as from the room where the DTR-5.1 is located. The following equipment (sold separately) is essential for using the Onkyo Multi-Room System: Onkyo’s Multi-Room System kits or...
  • Page 30 Outline of Multi-room Remote System If you connect Onkyo Multi-room Remote System components as shown below, you can control the components from an adjacent sub-room as well as from the room where the DTR-5.1 is located. Speaker A (Main room)

  • Page 31: Using The Remote Controller

    When you use a remote controller, typically you press one of the MODE buttons that corresponds to the device you wish to control, then press the operation buttons. For example, if you wish to control the DTR-5.1 from a remote con- troller, first press the MODE AUDIO button, then press an appropriate operation button.
  • Page 32 Numeric keys, ENT button HOME THEATER CONTROLLER Note: First connect an Integra/Onkyo CD player using the connection. 1. Press the MODE CD button. 2. Press the desired CD operation button. RC-424M Note: Make sure that you point the transmission part on the remote controller toward the sensor area on the DVD player.
  • Page 33 You may also use the following buttons: VOL q/u MUTING Controlling an Integra/Onkyo tape deck Note: First connect an Integra/Onkyo tape deck using the connection. (See page 9.) 1. Press the MODE AUDIO/TAPE button. 2. Press the desired tape deck operation button. TAPE operation buttons...

  • Page 34: Programming The Remote Controller Codes Of Other Devices Into The Rc-424M

    7. Operate the programmed button to make sure the learning function works. Note: The remote controller codes for the Integra/Onkyo CD player, DVD player, Onkyo tape deck and MD recorder have already been programmed into the buttons on the RC-424M. You may program other remote controller codes into these buttons.
  • Page 35 Programming the remote controller codes of other devices into the RC-424M See page 39 for information on how to erase the learned codes from all buttons. SEND/LEARN indicator HOME THEATER CONTROLLER RC-424M SEND/LEARN indicator HOME THEATER CONTROLLER RC-424M Erasing a learned code You can erase a learned code.

  • Page 36: Using A Macro Function

    A Macro function enables you to program a series of button operations on the remote controller into a single button. For example, you need to follow the steps below to play a CD player connected to the DTR-5.1 without using the Macro function: 1: Press the MODE AUDIO button.
  • Page 37 The SEND/LEARN indicator flashes twice slowly. 4. Check to see if the button has been programmed correctly. Point the RC-424M toward the DTR-5.1 and press the MACRO DIRECT button, and make sure that the device responds as programmed. Transmitting the codes in Macro mode takes a while.
  • Page 38 Using a Macro function HOME THEATER CONTROLLER 1, 2 HOME THEATER CONTROLLER 1. Press and hold down the corresponding MODE button 1, 2 2. Press the MACRO MODE button again. RC-424M 1. Press and hold down any one of the MODE buttons 2.
  • Page 39 Using a Macro function HOME THEATER CONTROLLER RC-424M Erasing all codes and operations programmed in the buttons This procedure will erase all remote controller codes for the other devices and all macro operations that have been programmed in the RC-424M (see pages 34, 36 and 37).

  • Page 40: Troubleshooting Guide

    Turn the power button off and then on again or remove the AC plug from the outlet and then plug it again. Contact your Integra/Onkyo authorized Ser- vice Center. Press the MUTING button on the remote con- troller to turn it off.

  • Page 41: Specifications

    Specifications AMPLIFIER SECTION Continuous Average Power output (FTC) All channels: 70 watts per channel min. RMS at 8 ohms, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 90 watts min. RMS at 6 ohms, 2 channels driven from 1 kHz with no more than 0.1% total harmonic dis- tortion.

  • Page 42: Control Positions And Names

    Control positions and names Standby/On Standby Power O f f Speakers Phones Display Front panel For more information about buttons or knobs, refer to the pages listed in the brackets ( [ ] ) below. 1. Standby indicator [5, 11] 2.
  • Page 43 RC-424M Remote controller Using the remote controller, you can control a CD player or cassette tape deck connected to the connector of the DTR-5.1. (See page 9 for more informa- tion.) 1. SEND/LEARN indicator [31] 2. ON/STNBY button [31] Power on/Standby on 3.
  • Page 44 Integra Division of ONKYO U.S.A. CORPORATION 200 Williams Drive, Ramesy, N.J. 07446, U.S.A. Tel: 201-825-7950 Fax: 201-825-8150 E-mail: integra@onkyousa.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222...

Table of Contents