Integra DTR-50.5 Instruction Manual page 74

Note
• When the setting is set to "On" and the menu is closed, the
names of connected -compatible components and
"RIHD On" are displayed on the AV receiver.
"Search..." → "(name)" → "RIHD On"
When the AV receiver cannot receive the name of the
component, it is displayed as "Player * " or "Recorder
(" * " shows up and indicates the number of components,
when two or more are received).
• When an -compatible component is connected to
the AV receiver via an HDMI cable, the name of the
connected component is displayed on the AV receiver
display. For example, while you are watching TV
broadcasting, if you operate a Blu-ray Disc/DVD player
(being powered on) with the remote control of the AV
receiver, the name of the Blu-ray Disc/DVD player will be
displayed on the AV receiver.
• Set it to " Off " when a connected piece of equipment is not
compatible or it is unclear whether the equipment is
compatible or not.
• If operation is not normal when set to
" "
setting to Off .
• Refer to the connected component's instruction manual for
details.
• When the "HDMI CEC (RIHD)" setting is set to "On", the
power consumption on standby mode slightly increases.
(Depending on the TV status, the AV receiver will enter
standby mode as usual.)
• The control does not support HDMI OUT SUB.
Use HDMI OUT MAIN instead.
• When the source equipment is connected with the
connection, it may malfunction if "HDMI CEC (RIHD)" is set
to "On".
■
HDMI Through
Off
BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2,
PC, AUX, TV/CD, PHONO:
Selects the input source for which the HDMI
Through function is enabled.
* ", etc.
Last:
The HDMI Through function is activated on the
input source selected at the time of setting the
AV receiver to standby mode.
When enabling the HDMI Through function,
regardless of whether the AV receiver is on or in
standby, both audio and video streams from an HDMI
input will be output to the TV or other components via
HDMI connection. The HDMI indicator will be dimly-lit
in standby mode. Note that the indicator may not light
under certain conditions (➔ page 23).
This setting is fixed to "Auto" automatically when the
above "HDMI CEC (RIHD)" setting is set to "On",
" On " , change the
resulting in automatic input source selection.
Note
• Only an input source assigned to an HDMI IN via
"HDMI Input" setting is enabled (➔ page 60).
• The power consumption in standby mode will increase
during the HDMI Through function; however in the following
cases, the power consumption can be saved:
– The TV is in standby mode.
– You are watching a TV program.
• Refer to the connected component's instruction manual for
details.
• Depending on the connected component, the correct input
source may not be selected with the setting fixed to "Auto".
• This setting is set to "Off" automatically when the "HDMI
CEC (RIHD)" setting is set to "Off".
• This function is only available for the HDMI OUT MAIN jack.
En-74
Advanced Operations
■
Audio TV Out (Main)
Off
On
This preference determines whether the incoming
audio signal is output from HDMI OUT MAIN. You
may want to turn this preference on if your TV is
connected to HDMI OUT MAIN and you want to listen
to the audio from a connected component through
your TV's speakers. Normally, this should be set to
"Off".
Note
• If "On" is selected and the audio can be output from the TV,
the AV receiver will output no sound through its speakers.
In this case, "TV Speaker" appears on the AV receiver's
display by pressing Display.
• When "HDMI CEC (RIHD)" is set to "On", this setting is
fixed to "Auto".
• This setting is fixed to "Off" when "Monitor Out" is set to
"Sub" (➔ page 59).
• With some TVs and input signals, no sound may be output
even when this setting is set to "On".
"
• When "Audio TV Out (Main)" or HDMI CEC (RIHD)" is set
to " On " and you're listening through your TV's speakers,
turning up the AV receiver's volume control will make the
sound be output from the AV receiver's front left and right
speakers. To stop the AV receiver's speakers producing
sound, change the settings, change your TV's settings, or
turn down the AV receiver's volume.
• Listening mode cannot be changed when this setting is set
to "On" and the audio is output from the TV.
• If the audio signal from the player is not supported by the
TV, the audio is not output from the TV even if this setting
is enabled. When the audio cannot be output from the TV,
(When "Monitor Out" is set to "Both", the audio cannot be
output form the TV connected to both HDMI OUT MAIN and
HDMI OUT SUB) the audio is output from the speakers
connected to the AV receiver.
Operating
procedure
(➔ page 58)