5. Printer Features
PS Menu
This section describes the user tools in the PS Menu under Printer Features.
Default settings are shown in bold type.
This menu appears only when the optional PostScript 3 unit is installed.
Data Format
You can select a data format.
The default setting is TBCP.
This setting is not effective when operating the machine with an EtherTalk connection.
When operating the machine with an Ethernet connection, the print job is canceled under the following
conditions:
• The printer driver data format is TBCP, and the data format selected on the display panel is Binary
5
Data.
• The printer driver data format is binary, and the data format selected on the display panel is
TBCP.
Resolution
You can set the print resolution in dots per inch.
The default setting is 600 dpi (Standard).
Color Setting
You can make an RGB setting.
The default setting is Super Fine.
Color Profile
You can set the color profile.
The default setting is Auto.
• p.12 "Accessing User Tools"
212