Table of Contents
Advertisement
2. System Settings
DNS Configuration
Make settings for the DNS server.
The default setting is Auto-Obtain (DHCP).
When you select [Specify], enter the DNS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a
number).
2
DDNS Configuration
Specify the DDNS settings.
The default setting is Active.
IPSec
Specify the machine's IPSec function Active/Inactive.
The default setting is Inactive.
Domain Name
Specify the domain name.
The default setting is Auto-Obtain (DHCP).
When you select [Specify], enter the domain name using up to 63 characters.
WINS Configuration
Specify the WINS server settings.
The default setting is Off.
If [On] is selected, enter the WINS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number).
If DHCP is in use, specify the scope ID. Enter a scope ID using up to 31 characters.
Effective Protocol
Select the Protocol to use in the network.
The default setting for "IPv4" is Active.
The default setting for "IPv6" is Inactive.
The default setting for "NetWare" is Active.
The default setting for "SMB" is Active.
The default setting for "AppleTalk" is Active.
NCP Delivery Protocol
Select the protocol NCP delivery.
The default setting is TCP / IP Priority.
If you select "IPX Only" or "TCP / IP Only", you cannot switch the protocol even if you cannot connect
with it. If "NetWare" in [Effective Protocol] is set to "Inactive", you can only use TCP/IP.
NW Frame Type
Select the frame type when you use NetWare.
58
Advertisement
Table of Contents
