Table of Contents
Advertisement
6. Scanner Features
This setting is valid if [SADF] is specified for [Original Feed Type] when scanning.
If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals
with the number keys. Scanning will start automatically if additional originals are placed within this
time. You can end scanning and begin transmission by pressing the [ ] key within this time. Once
the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for the additional originals until the [ ] key is
pressed. Scanning will start when additional originals are placed and the [Start] key is pressed. You
can end scanning and begin sending by pressing the [ ] key.
Even if originals are placed on the exposure glass, the machine will operate according to the specified
settings. However, every time originals are placed on the exposure glass, you must press the [Start]
key to start scanning. Scanning will start if additional originals are placed and the [Start] key is pressed
within this time. You can end scanning and begin transmission by pressing the [ ] key within this time.
Once the specified time has elapsed, transmission starts automatically.
If originals are placed in the auto document feeder (ADF), transmission will start without waiting for
additional originals after all originals in the ADF have been scanned, regardless of the specified
settings.
6
If a paper misfeed occurs or any of the following operations are performed while the machine is
waiting for additional originals, the countdown stops and does not start again until the [ ] key is
pressed.
• Changing the settings such as the scan settings
• Opening the upper cover of the ADF
• Pressing the [Interrupt] key to activate the copy mode
Background Density of ADS (Full Color)
Characteristics due to the type of paper such as nonwhiteness like newspaper or transparent originals
can be reduced by correcting the scanning density.
The default setting is the middle of 5 adjustment levels.
• p.12 "Accessing User Tools"
218
Advertisement
Table of Contents
