2. System Settings
Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under System Settings.
Default settings are shown in bold type.
2
• If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed
might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
The default setting is Tray 1.
If the optional large capacity tray (LCT) or wide large capacity tray (Wide LCT) is installed, [LCT] is
displayed.
Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
The default setting is Tray 1.
If the optional large capacity tray (LCT) or wide large capacity tray (Wide LCT) is installed, [LCT] is
displayed.
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
The default setting is Tray 1.
If the optional large capacity tray (LCT) or wide large capacity tray (Wide LCT) is installed, [LCT] is
displayed.
The default tray switches to LCT if the optional large capacity tray (LCT) or wide large capacity tray
(Wide LCT) is installed.
Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when printing data from the computer.
The paper sizes you can set for bypass tray are as follows:
• Metric version
• "Auto Detect", "A3 ", "A4 ", "A4 ", "A5 ", "A5 ", "A6 ", "B4 JIS ", "B5 JIS ", "B5
JIS ", "B6 JIS ", "12 18 ", "11 17 ", "11 15 ", "11 14 ", "10 15 ", "10
14 ", "8
13 ", "8 13 ", "8 10
• Inch version
44
1
1
/
14 ", "8
/
2
1
1
1
1
", "7
/
10
/
", "5
/
4
2
1
13 ", "8
/
11 ", "8
2
2
1
/
", "8 10
/
", "8 10 ", "8 10 ", "7
2
2
1
8
/
", "100mm 148mm ", "Custom Size"
2
2
1
1
/
11 ", "8
/
14 ", "8
2
4
1
/
10
4
1
/
4
1
/
2