Table of Contents
Advertisement
7. Registering Addresses and Users for Facsimile/Scanner Functions
To change the protocol
This section describes how to change the protocol.
1.
Press [SMB] or [NCP].
A confirmation message appears.
2.
Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3.
Enter each item again.
7
• p.260 "Using SMB to Connect"
• p.271 "Using NCP to Connect"
Changing items under FTP
This section describes how to change the registered FTP folder.
1.
Press [Change] under "Port Number".
2.
Enter the new port number, and then press the [ ] key.
3.
Press [Change] under "Server Name".
4.
Enter the new server name, and then press [OK].
5.
Press [Change] under "Path".
6.
Enter the new path, and then press [OK].
Deleting an FTP Folder
This section describes how to delete the registered FTP folder.
270
Advertisement
Table of Contents
