Table of Contents
Advertisement
2. System Settings
• Thick Paper 2 (164.0 249.9 g/m
lb.Index)
• Thick Paper 3 (250.0 300.0 g/m
lb.Index)
The default setting for "Paper Type" is No Display.
The default setting for "Paper Thickness" is Plain Paper 1.
2
The default setting for "Apply Duplex" is Yes.
The default setting for "Apply Auto Paper Select" is Yes.
The key mark is displayed next to the paper tray if [No] is selected in [Auto Paper Select].
Auto Paper Select can only be selected for the copier function if [No Display] and [Recycled Paper]
are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This
Machine.
Front Cover Sheet Tray
You can specify and display the paper tray that is used to set front cover sheets. After selecting the
paper tray, you can also specify the display timing and copy method for two-sided copying.
The default setting is Off.
When [At Mode Selected] is selected, front cover sheet tray settings only appear when the cover
function or slip sheet function is selected.
When [Full Time] is selected, the front cover sheet tray is always displayed.
Back Cover Sheet Tray
You can specify and display the paper tray that is used to set back cover sheets. After selecting the
paper tray, you can also specify the display timing and copy method for two-sided copying.
The default setting is Off.
When [At Mode Selected] is selected, back cover sheet tray settings only appear when the cover
function or slip sheet function is selected.
When [Full Time] is selected, the back cover sheet tray is always displayed.
Slip Sheet Tray
You can specify and display the paper tray that is used for setting slip sheets.
You can also specify the display timing and copy method for two-sided copying.
The default setting is Off.
When [At Mode Selected] is selected, slip sheet tray settings only appear when the cover function or
slip sheet function is selected.
When [Full Time] is selected, the slip sheet tray is always displayed.
50
2
) (44 66.9 lb.Bond, 60 91.9 lb.Cover, 90.5 137.9
2
) (67 80 lb.Bond, 92 110 lb.Cover, 138 165.7
Advertisement
Table of Contents
