Switching Regulator (Ps) - Toshiba e-STUDIO6520C Service Handbook

Note:
The shape of the SRAM board for the SYS
board differs from the one for the LGC board.
Be sure to assemble the correct SRAM
board.
7.1.14

Switching regulator (PS)

(1) Take off the rear cover.
Service Manual "3.5.18 Rear cover"
(2) Take off the PSU cover.
(3) Disconnect 2 connectors.
e-STUDIO5520C/6520C/6530C
REPLACEMENT OF PC BOARDS/HDD
SRAM board
<for SYS board>
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
7 - 14
SRAM board
<for LGC board>
Fig. 7-39
PSU cover
Fig. 7-40
Fig. 7-41