Cutting Unit; Lift Lever For Cutting Unit - Jonsered FRM13 Automatic Operator's Manual

Cutting unit

Jonsered FRM 13 AUTOMATIC is equipped with a
Mulcher 90.

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades will automatically stop rotating (transport
position).
If the lock button is pressed and the lever is moved
forward the unit will be lowered and the blades will
automatically start rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the
lawn.
PRESENTATION
Lifting of the cutting unit (transport position)
Lowering of the cutting unit (cutting position)
9
English –