Presentation
Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years. Two models
equipped with four-wheel drive and engines from Briggs &
Stratton are described in this operators manual.
The power transmission from the engine is handled by a
hydrostatic gearbox, which allows variable variation of the
speed by using the pedals.
Throttle and choke controls
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
The control is also used to activate the choke. When the
choke is engaged a richer fuel and air mixture is fed to the
engine, which facilitates starting in the cold.
Speed limiter
The speed of the machine is steplessly regulated with two
pedals. Pedal (1) is used to drive forwards, and pedal (2) to
drive backwards.
WARNING! Make sure that branches do not
!
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.
PRESENTATION
Parking brake
The parking brake is applied as follows:
1 Push down the brake pedal.
2 Press in the lock button on the steering column.
3 Release the parking brake pedal while keeping the button
pressed in.
The parking brake lock disengages automatically when the
brake pedal is pressed.
Cutting unit
FR 2113MA 4X4 and FR 2116MA 4X4 have a 3-blade Combi-
unit
The Combi-unit, equipped with a Mulching-plug, finely chops
the cuttings to fertiliser. Without the Mulching-plug the unit
works in the same way as a rear ejection unit.
Lifting lever for the cutting unit
The lift lever is used to set the cutting unit in transport or
mowing position.
If the lever is pulled backwards the unit is raised and the
blades automatically stop rotating (transport position).
– 13
English