Lubrication; Checking The Tyre Pressure; Check The Tyre Pressures (60 Kpa) - Jonsered FRM13 Automatic Operator's Manual

Lubrication

The following two lubrication points should be
regularly lubricated with high quality graphite
grease.
With daily use lubrication should be conducted
twice a week.
General lubrication
All joints and bearings are lubricated on manufac-
ture with molybdenum sulphide grease. Re-grease
with same type of grease. Lubricate the steering
and control wires with engine oil.
The machine should be lubricated regularly, and
twice a week when used daily.

Checking the tyre pressure

The tyre pressure should be 60 kPa (0.6 kp/cm
round.
To improve driving the pressure on the rear tyres
can be reduced to 40 kPa (0.4 kp/cm2).
The maximum tyre pressure is 100 kPa (1.0 kp/cm
IMPORTANT INFORMATION
Different tyre pressures on the front tyres
will result in the blades cutting the grass
at different heights.
MAINTENANCE
2
) all
2
).
27
English –