Cutting Unit; Lift Lever For Cutting Unit - Jonsered Front Rider FRM13A Operator's Manual

PRESENTATION

Cutting unit

FR 13 have a cutting unit with rear ejection, i.e. the
grass cuttings are thrown out behind the cutting
unit.
FRM 13 A have a twin-blade BioClip cutting unit.

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades will automatically stop rotating (transport
position).
If the lock button is pressed and the lever is moved
forward the unit will be lowered and the blades will
automatically start rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the lawn.
Lifting of the cutting unit (transport position)
Lowering of the cutting unit (cutting position)
12
– English