Checking The Engine's Oil Level; Checking The Engine's Cooling Air Intake; Checking The Fuel Pump's Air Filter; Check The Engine's Oil Level - Jonsered FRM13 Automatic Operator's Manual

Check the engine's oil level

Check the oil level in the engine when the machine
is horizontal.
Dismantle the engine hood as per the description
on page 17.
Release the dip stick and pull out. Wipe off the oil
and insert again.
The dip stick must be fully screwed down.
Now release the dip stick again and pull out. Check
the oil level.
The oil level should lie between the markings on dip
stick. If the level approaches the ADD mark, top up
with oil to the FULL mark.
The oil is filled in the same hole for the dip stick
Use engine oil SAE 30 or SAE 10W/30, class CD-
SF.
The total oil volume in the engine is 1,4 litres.
Check the engine's cooling air intake
Dismantle the engine hood as described on page
17.
Check that the cooling intake is free from leaves,
grass and dirt.
If the cooling intake is blocked this will interfere with
the cooling of the engine, which can damage the
engine.
Checking of the fuel pump's air filter
Check regularly that the fuel pump's air filter is free
from dirt.
The filter can when necessary be cleaned with a
brush.
18
– English
MAINTENANCE
ADD
ADD
FULL
FULL