KX-TCD952BL(E)34~42
Selecting first handset
One handset will ring first, then all other
handsets will ring if the first handset is not
answered. You can choose which handset will
ring first and the ring count (1 to 6) until all
handsets ring. The factory preset is 3 rings.
1
Press
2
1
Press
.
3
Enter the base unit password (p. 25).
· The current setting is displayed.
1: All handsets
2: Specified handset(s)
3: First handset
4
3
Press
.
· The current registered handset number(s)
is/are displayed.
5
Enter the handset number you want to
ring.
· The selected handset number flashes.
Ex. Handset 4 is selected.
iu3 - i23456
· If you misdial, press the number again.
6
Press
.
· The handset number is stored.
· The current ring count is displayed.
Ex. Ring count 3 is selected.
i03 - i23456 - 3
18/4/00
15:06
Page 39
IN T
then
.
7
Press a dialing button
select the ring count.
8
Press
.
· A confirmation tone sounds and the
display will return to the stand-by mode.
· Even if you select "Specified handset(s)" or
"First handset", calls can also be received on
the handsets which do not ring.
Selecting all handsets
When a call is received, all handsets will ring at
the same time.
1
I N T
Press
then
2
1
Press
.
3
Enter the base unit password (p. 25).
4
1
Press
.
5
Press
.
· A confirmation tone sounds and the
display will return to the stand-by mode.
1
to
6
to
.
39