Table of Contents
Advertisement
KX-TCD952BL(E)06~13
Settings
Battery Charge
At the time of shipment, the batteries are not
charged. To charge, place the handset on the
base unit. Please charge the batteries for about
4 hours before initial use.
· The charge indicator (
Battery strength
You can check the present battery strength on the display.
Battery strength
Battery icon
Recharge
When "
" flashes or the unit beeps every
15 seconds, recharge the batteries.
Battery information
After your Panasonic batteries are fully charged:
Operation
While in use (Talk)
While not in use (Stand-By)
· Battery life may be shortened depending on usage conditions, such as:
— when viewing the Caller ID Caller List, and
— ambient temperature.
· Clean the handset and the base unit charge contacts with a soft, dry cloth once a month.
Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the batteries
may not charge properly.
· If the batteries are fully charged, you do not have to place the handset on the base unit until
"
" flashes. This will maximize the battery life.
· The batteries cannot be overcharged.
* Nickel metal hydride (Ni-MH) rechargeable batteries (AAA size) are available.
When you replace the batteries, you must program the battery type selection (see page 43).
· Read "Important Notice Concerning the Correct Use and Charging of Ni-Cd (Ni-MH) Batteries" on
page 44.
10
18/4/00
15:02
Page 10
) lights.
Fully charged
Approx. Ni-Cd battery life (Included)
Up to about 6 hours
Up to about 65 hours
Charge Indicator (
Medium
Low
Approx. Ni-MH battery life (Optional)*
Up to about 12 hours
Up to about 130 hours
OR
)
No power
(Flashing)
Advertisement
Table of Contents
