Panasonic KX-TCD952BLB Operating Instructions Manual page 46

KX-TCD952BL(E)43~51
Before Requesting Help
Problem
You cannot program function items such
as the dialing mode.
You cannot store a phone number in
memory.
While programming or searching, the
unit starts to ring and stops the
program/search.
The unit does not display the caller's
phone numbers.
does not function.
You cannot redial.
The paged handset does not answer.
While using the intercom, two tones
sound.
The unit misdials when connected to a
PBX.
46
18/4/00 15:07 Page 46
· Programming is not possible while the unit is in the
· Do not pause for over 60 seconds while
· You cannot store a phone number while the unit is in
· Do not pause for over 60 seconds while storing.
· To answer the call, lift the handset or press
· Other telephone equipment may be interfering with
· Other electrical appliances connected to the same
· The handset is too far from the base unit.
· The handset is engaged in an outside call. Wait until
· If the last number dialed was more than 24 digits
· The handset is not in the same radio area.
· The handset is engaged in an outside call.
· The handset has been canceled or has not been
· A call is being received. To answer, press
· Check the pause function (p. 23).
Remedy
talk or intercom mode.
programming.
the talk or intercom mode.
Start again from the beginning after hanging up.
your phone. Disconnect them and try again.
outlet may be interfering with the Caller ID
information. Telephone line noise may be affecting
the Caller ID information.
the in use indicator ( ) light goes out.
long, the number will not be redialed.
registered. Register the handset in the base unit
(p. 35).
twice.
.