Table of Contents
Related Manuals for Panasonic KX-TCD700NL
Summary of Contents for Panasonic KX-TCD700NL
-
Page 1: Operating Instructions
30401 English KX-TCD700NL 25/4/01 2:31 pm Page 1 Digital Cordless Phone KX-TCD700NL Model No. Operating Instructions Caller ID Compatible PLEASE READ BEFORE USE AND SAVE Charge the batteries for approx. 10 hours before initial use. - Page 2 30401 English KX-TCD700NL Dear purchaser, You have acquired a KX-TCD700NL, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission.
-
Page 3: Safety Instructions
30401 English KX-TCD700NL Safety Instructions Take special care to follow the safety suggestions listed below. Environment 1) Do not use this unit near water—for example, near a bathtub, washbowl, sink, etc. Damp basements should also be avoided. 2) The unit should be kept away from heat sources such as radiators, cookers, etc. It also should not be placed in rooms where the temperature is less than 5°C or greater than... -
Page 4: Table Of Contents
30401 English KX-TCD700NL Contents Chapter 1 Preparation Getting Started ...6 Connections...6 Installing the Batteries in the Handset ...7 Battery Charge ...7 Battery Information ...7 Battery Replacement ...8 Base Unit Location ...8 Wall Mounting...9 Location of Controls...10 Displays ...11 Basic Start-up Operations ...12... - Page 5 30401 English KX-TCD700NL Chapter 4 Programmable Functions (On the Base Unit) Programmable Functions (On the Base Unit) ...40 Bell Selection...40 Select Base Unit Ringer Volume ..41 Setting the Clock ...41 Select Earth/Flash Mode ...42 Select Pause Timing...42 Set Base Unit PIN ...43 Cancelling a Handset ...43...
-
Page 6: Getting Started
USE ONLY WITH Panasonic AC ADAPTOR PQLV1CE. • Be careful not to confuse the telephone line jack with the AC adaptor jack on the base unit. If connected improperly, the base unit will not work and damage may occur. -
Page 7: Installing The Batteries In The Handset
30401 English KX-TCD700NL Installing the Batteries in the Handset • If the rechargeable batteries are not inserted correctly, the handset will not work. Battery Charge At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. -
Page 8: Battery Replacement
30401 English KX-TCD700NL Getting Started Battery Caution: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the batteries specified. 2. Do not use non-rechargeable batteries. 3. Do not mix old and new batteries. -
Page 9: Wall Mounting
30401 English KX-TCD700NL 25/4/01 2:32 pm Page 9 Wall Mounting This unit can be mounted on a wall. • Install screws using the wall template below. • Connect the line cord, and AC Adaptor. • Arrange the wires as shown, then mount the unit. -
Page 10: Location Of Controls
30401 English KX-TCD700NL Location of Controls Base Unit Handset Display (Speed Dial) Button (Talk) Button Navigator Key Redial/ Pause) Button Charge Contact (Recall) Button 25/4/01 2:32 pm Page 10 Charge Contacts Page Button Receiver (Function/OK) Button (Talk Off/Power) Button (Cancel) Button... -
Page 11: Displays
30401 English KX-TCD700NL Displays Handset Display Icons The in-range icon indicates that the handset is in range of the base unit. It flashes when the handset is out of range. The page/intercom icon is displayed when paging or using the intercom. It flashes when another unit pages the handset. -
Page 12: Basic Start-Up Operations
30401 English KX-TCD700NL Basic Start-up Operations Turning the Power On and hold • After all characters briefly appear, a confirmation tone sounds. The display will change to the standby mode when the button is released. • The current connected base unit number is displayed ( •... -
Page 13: Making Calls
30401 English KX-TCD700NL Making Calls Note: for basic making calls operation, see page 12. To Dial after Confirming the Entered Number With this feature you are able to confirm the entered number before you start dialling. 1. Dial a Phone Number... -
Page 14: To Select The Receiver Volume
30401 English KX-TCD700NL Making Calls To Edit/Clear Numbers in the Redial List To edit and clear numbers in the redial memory, press then follow from step 2 (page 20). Direct Call You can store one number into memory and then call this number by pressing Incoming calls are accepted. -
Page 15: Answering Calls
30401 English KX-TCD700NL Answering Calls For basic answering call operation, see page 12. • The handset and base unit will not ring if both ringer volumes are set to OFF (p. 29, 41). Auto Talk If you set the Auto Talk Feature to ON (p. 34), you can answer a call by lifting the... -
Page 16: Speed Dialling
30401 English KX-TCD700NL Speed Dialling Storing Phone Numbers in Memory You can store up to 20 telephone numbers in the handset. Storing new numbers (Speed dial is selected, speed dial icon is displayed 3. Enter phone number (Up to 24 digits) (Phone numbers are displayed from the left edge of the LCD). - Page 17 30401 English KX-TCD700NL Speed Dial Menu In the speed dial menu, it is possible to carry out the following operations: • Edit a speed dial number ( • Clear a speed dial number ( • Register a speed dial number to Hot Key ( (Standby Mode) •...
- Page 18 30401 English KX-TCD700NL Speed Dialling Saving Numbers in Speed Dial List ( Telephone numbers can be saved into the speed dial list from other lists eg. Caller ID list, re-dial list, etc. To save a number from other lists; 1. Display number to be saved “...
-
Page 19: Caller Id Service
30401 English KX-TCD700NL Caller ID Service Caller ID, where available, is a telephone company service. After subscribing to Caller ID, this phone will display the caller’s phone number. This unit is compatible with a Caller ID service offered by your telephone company. - Page 20 30401 English KX-TCD700NL Caller ID Service Caller ID Sub-Menu In the Caller ID sub-menu, it is possible to carry out the following operations: • Save a Caller ID Number to speed dial list ( • Edit a Caller ID Number ( •...
-
Page 21: Using The Caller List
30401 English KX-TCD700NL Using the Caller List Viewing the Caller List Telephone numbers of up to 50 different callers are stored from the most recent to the oldest call in the Caller List. When the 51st call is received, the oldest call is deleted. -
Page 22: For Optional Multi-Unit Users
• The optional handset/charger model number is KX-A114EX. The functions of the optional handset are the same as those of KX-TCD700NL handset. • To register a handset to a base unit, see page 36. -
Page 23: Paging/Intercom
30401 English KX-TCD700NL Paging/Intercom Paging All Handsets from the Base Unit (On the Base Unit). • All handsets will ring for one minute. 2. To stop paging, Intercom between Handsets A 2-way intercom is available between handsets. Eg. Handset 1 is paging Handset 2 1. -
Page 24: Transferring A Call Using The Intercom
30401 English KX-TCD700NL Paging/Intercom Transferring a Call using the Intercom 3. (Handset 2) When the unit rings, 4. (Handset 1) Transferring a call • The transfer is completed to return to the External Call Transferring a Call without the Intercom This feature enables you to transfer the call to another handset without waiting for the paged handset to answer. -
Page 25: Special Features
30401 English KX-TCD700NL Special Features How to Use the Pause Feature (For Analog PBX Line/Long Distance Service Users) We recommend you insert “ access a long distance service (When Eg. Line access number and then phone number. (After a few seconds, display will start showing the length of the call). -
Page 26: Setting The Key Lock On/Off
30401 English KX-TCD700NL Special Features Setting the Key Lock (ON) You can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is cancelled. You can answer a call by pressing any dialling button (-Any Key Answer). -
Page 27: On The Handset
30401 English KX-TCD700NL Summary of Programmable Functions On the Handset You can program the following function items using the handset near the base unit. See the corresponding pages for function details. (Standby Mode) Refer to relevant page as indicated. •... -
Page 28: Setting Time Alarm Function
30401 English KX-TCD700NL Setting Time Alarm Function Within the Time Alarm menu, it is possible to program the following: • Set Time of Alarm ( • Set Alarm ON/OFF ( to once ( ), repeat daily ( (Standby Mode) To Stop the Alarm When the alarm sounds, press any dialling button •... -
Page 29: Setting Ringer Options
30401 English KX-TCD700NL Setting Ringer Options Within the Ringer Option menu, it is possible to program the following: • Select the Handset Ringer Volume ( OFF ( • Select the Ringer Pattern for External Incoming Call ( • Select the Ringer Pattern for Internal Call ( •... -
Page 30: Setting Tone Options
30401 English KX-TCD700NL Setting Tone Options Within the Tone Option menu, it is possible to program the following: • Set Key Confirmation Tone ON/OFF ( You can choose whether or not the handset keys will sound tones (eg. key tone, confirmation tone, error tone). -
Page 31: Setting Display Options
30401 English KX-TCD700NL Setting Display Options Within the Display Option menu, it is possible to program the following: • Select the Standby Mode Display ( In the standby mode, it is possible to set the display to show; Base Number ), Handset Number ( •... -
Page 32: Setting Call Options
30401 English KX-TCD700NL Setting Call Option Within the Call Option menu, it is possible to program the following: • Set Call Prohibition ( • Set Direct Call Number ( memory. This feature allows you to make a call easily by pressing Incoming calls are accepted. -
Page 33: Set Direct Call On/Off
30401 English KX-TCD700NL • Set Call Prohibition (this prohibits anyone from making a call with your handset except for emergency calls. Incoming calls are accepted ( • Set Direct Call ON/OFF ( (Standby Mode) Note: • To return to the previous step during programming, •... -
Page 34: Setting Other Options
30401 English KX-TCD700NL Setting Other Options Within the Other Option menu, you can program the following: • Change Handset PIN ( • Set Auto Talk ON/OFF ( The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing ON. -
Page 35: Change Handset Pin
30401 English KX-TCD700NL • Change Handset PIN ( • You can program a 4 digit password for the handset. The factory pre-set is 0000. Changing the password may prevent the unauthorised use of your unit by another person. (Standby Mode) NOTE: Once you have programmed the password, you cannot confirm it. -
Page 36: Registration
30401 English KX-TCD700NL Registration • Registering a Handset to a Base Unit ( The handset supplied with the base unit is already registered. If an optional handset/base unit is purchased, the following procedure needs to be carried out before initial use. -
Page 37: Cancelling A Base Unit
30401 English KX-TCD700NL • Cancelling a Base Unit ( If another handset is out of range and/or its power is OFF when ‘Cancelling a Handset’, the previous base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base unit registered in the cancelled handset. -
Page 38: Select Base Unit
30401 English KX-TCD700NL Select Base Unit ( • Automatic Base Unit Access ( The handset automatically selects a registered base unit. • When the handset moves to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit. -
Page 39: Reset Handset
30401 English KX-TCD700NL Reset Handset ( This function enables the handset to clear the following settings at one time. They will return to their initial settings. (Standby Mode) Note: • To return to the previous step during programming, • To exit the programming mode at any time,... -
Page 40: Programmable Functions (On The Base Unit)
30401 English KX-TCD700NL Programmable Functions (On the Base Unit) Bell Selection There are three choices for Bell Selection when a call is being received • all handsets ring. “All handsets” • the selected handset(s) ring(s). “Selected handset(s)” • the selected handset rings first. Then if it does not answer, all other handsets will ring, “Selected then all handsets”. -
Page 41: Setting The Clock
30401 English KX-TCD700NL To Select the Base Unit Ringer Volume 4 levels are available. The factory pre-set is MEDIUM. When set to OFF, the base unit will not ring. Setting the Clock To set clock, please program as below. The clock can be displayed as an option in standby mode (see page 31). -
Page 42: Select Earth/Flash Mode
Select Earth/Flash Mode The earth relay can be installed as an option depending on your PBX requirements. Please consult your nearest Panasonic Service Centre for installation. Then you can select the flash or earth mode. The factory pre-set is Flash. -
Page 43: Set Base Unit Pin
30401 English KX-TCD700NL Set Base Unit PIN You can program a 4 digit password for the base unit. The factory pre-set is 0000. Changing the password may prevent the unauthorised use of your unit by another person. Cancelling a Handset Each handset can cancel itself or another handset. -
Page 44: Call Restriction
30401 English KX-TCD700NL Programmable Functions (On the Base Unit) Call Restriction You can restrict desired handset(s) from dialling selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialled out. For example, if “00” is assigned as the call restriction number, international calls cannot be made. -
Page 45: Set Auto Route Selection
30401 English KX-TCD700NL Automatic Route Selection Automatic Route Selection (ARS) is a feature which selects the least expensive carrier service when making long distance calls. 1. After subscribing to a 2nd carrier service, store the 2nd carrier code. 2. Then store the area codes (up to 25 codes) – 2nd carrier service charge rates are higher than the first carrier service. -
Page 46: Storing The Area Code(S)
30401 English KX-TCD700NL Programmable Functions (On the Base Unit) Automatic Route Selection • Storing the Area Code. (Standby mode) 25/4/01 2:32 pm Page 46 continued • Enter PIN (4 digits). • • Enter area code. • • 1st Area code is stored to memory 2nd Area code is displayed. -
Page 47: Using International Carrier Services
30401 English KX-TCD700NL Using International Carrier services Automatic Route Selection (ARS) is also used for international calls. After subscribing to a second international carrier service, store the second international carrier code (see page 45). Store “00 (international code)” and those country codes (up to 25 codes) instead of area codes (see page 44). -
Page 48: Reset Base Unit
30401 English KX-TCD700NL Programmable Functions (On the Base Unit) Reset Base Unit This function enables the base unit to clear the following settings at one time. They will return to their initial settings. The following are factory default settings of the Base Unit. -
Page 49: Option Covers
30401 English KX-TCD700NL Option Covers You can change the look of your phone’s handset with option covers. 1. Remove the battery cover by sliding while pressing the arrow. Remove the batteries. 2. The option cover is locked with the right and left tabs. Unlock one of the tabs... -
Page 50: Using The Belt Clip
30401 English KX-TCD700NL Option Covers 4. Place the new option cover fitting the tabs on the cover into their slots on the handset. 5. Snap the option cover shut on the lower middle and upper 6. Connect the batteries and close the battery cover. -
Page 51: Before Requesting Help
30401 English KX-TCD700NL Before Requesting Help Problem The unit does not work. “ ” flashes and an alarm tone sounds when you A busy tone sounds when you You cannot dial. “ ” flashes during a conversation and the call is disconnected. - Page 52 30401 English KX-TCD700NL Before Requesting Help Problem While programming or searching, the unit starts to ring and stops the program/search. The unit does not display the caller’s phone numbers. does not function. You cannot redial. The paged handset does not answer.
- Page 53 30401 English KX-TCD700NL Problem “ ” flashes or the unit bleeps every 15 seconds. You charged the batteries fully, but “ ” flashes. 25/4/01 2:32 pm Page 53 • Charge the batteries fully (p.7). • Install new batteries (p.7). • Clean the charge contacts and charge again (p.7).
- Page 54 Voor reparatle client de apparatuur franco verzonden te worden aan: PANASONIC-CENTRE NEDERLAND (Servicom b.v.), Zonweg 60, 2516 BM DEN HAAG, tel. 070-3314314. DE GARANTIE VERVALT INDIEN: a. Geen geldige en.volledig ingevuld (op de dag van verkoop) garantlebewijs en gedateerde fakuur zijn bijgesloten.
- Page 55 30401 English KX-TCD700NL 25/4/01 2:32 pm Page 55...
- Page 56 30401 English KX-TCD700NL 25/4/01 2:32 pm Page 56 Manufacturers Declaration: Kyushu Matsushita Electric (U.K.) Limited hereby declare that this product is in conformity with the essential requirements and other relevant provisions of the R&TTE Directive, 1999/5/EC. A copy of the manufacturers declaration of conformity to the essential requirements of the R&TTE Directive is available at the following web address:...