Setting All Or Selected Handsets To Ring - Panasonic KX-TCD430NZ Operating Instructions Manual

Setting all or selected
handsets to ring
You can select one of 3 methods to
determine how the handsets ring for
incoming calls.
− "1": All handsets will ring.
− "2": Selected handset(s) will ring.
− "3": Selected handset(s) will ring, then all
handsets will ring.
Setting all handsets to ring
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {1}.
4
Enter "0000" (default base unit PIN).
L If you changed PIN, enter it (page 20).
5
Press {1} to select "1".
6
Press {>}, then press {ih}.
Setting the selected handset(s) to ring
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {1}.
4
Enter "0000" (default base unit PIN).
L If you changed PIN, enter it (page 20).
5
Press {2} to select "2".
L All registered handset numbers will be
displayed and the pre-selected
handset number will flash.
6
Press the desired handset number(s).
L The selected handset number(s) will
flash.
L To cancel a selected handset number,
press the number again. The number
will stop flashing.
7
Press {>}, then press {ih}.
Multi-unit Operation
Setting the selected handset(s) to ring
before all handsets ring
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {1}.
4
Enter "0000" (default base unit PIN).
L If you changed PIN, enter it (page 20).
5
Press {3} to select "3".
L All registered handset numbers will be
displayed and the pre-selected
handset number will flash.
6
Press the desired handset number(s).
L The selected handset number(s) will
flash.
L To cancel a selected handset number,
press the number again. The number
will stop flashing.
7
Press {>}.
8
Press a dial key from {1} to {6} to select
the number of rings before all handsets
ring.
L The selected number of rings will be
shown on the right edge of the display.
9
Press {>}, then press {ih}.
25