Answering Calls - Panasonic KX-TCD952BLB Operating Instructions Manual

KX-TCD952BL(E)14~23
To redial the last number dialed
Press
·The last number dialed is automatically redialed.
To redial after confirming the
numbers in redial memory
The unit automatically stores the last
10 numbers dialed into redial memory.
1
Press .
· The last number dialed is displayed.
2
Select the desired number by pressing
.
· You can also search from the most recent
to oldest number by pressing
search from the oldest to most recent
number, press
----------
· "
memory.
· To exit the list, press

Answering Calls

Make sure that the power is ON (p. 11), otherwise the handset will not ring.
If the handset is off the base unit, press
.
· You can also answer a call by pressing any
dialing button 0
· The handset and base unit will not ring if both
ringer volumes are set to OFF (p. 12, 13).
To turn the handset ringer off
temporarily
When the handset starts ringing, press
firmly.
18/4/00 15:04 Page 15
.
. To
.
" denotes the end of redial
firmly.
C
to 9 , or .
3
Press .
· The number is dialed automatically.
To clear all of the numbers in the
redial memory
1
Press .
2
Press or until " F9 " is displayed,
then press .
OK
3
Press .
· A confirmation tone sounds and the
display will return to the stand-by mode.
· "
" is displayed and the handset
stops ringing.
· The ringer will turn back on for the next call.
· This function will not work when the handset is
on the base unit.
Auto Talk
If you set the Auto Talk feature to ON (p. 13),
you can answer a call by lifting the handset off
the base unit without pressing .
15