1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Cordless Telephone
  5. KX-TCD965EC
  6. Operating instructions manual

Panasonic KX-TCD965EC Operating Instructions Manual

Digital cordless answering system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KX-TCD965E-1(1)
99.9.27 7:54 PM
Operating Instructions
F
1
4
G HI
7
PQ RS
RC L
PLEASE READ BEFORE USE AND
SAVE.
Charge the batteries for about 4 hours before initial use.
This equipment is not designed for making emergency
telephony calls when the power fails. Alternative arrangements
should be made for access to emergency services.
Page 1
Digital Cordless Answering System
Model No.
3
2
DE F
AB C
6
MN O
5
JK L
9
WX YZ
8
TU V
0
PW R
KX-TCD965EC
Caller ID Compatible

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TCD965EC

Summary of Contents for Panasonic KX-TCD965EC

  • Page 1 KX-TCD965E-1(1) 99.9.27 7:54 PM Page 1 Digital Cordless Answering System KX-TCD965EC Model No. Operating Instructions DE F AB C MN O JK L G HI WX YZ TU V PQ RS PW R RC L PLEASE READ BEFORE USE AND Caller ID Compatible SAVE.

  • Page 2: Important Information

    KX-TCD965EC-1(2~25) 99.9.27 8:04 PM Page 2 Important Information Do not connect the AC adaptor to any Any other usage will invalidate the AC outlet other than the standard AC approval of the apparatus if as a result, it 230–240 V, 50 Hz.
  • Page 3 KX-TCD965EC-1(2~25) 99.9.27 8:04 PM Page 3 This cordless telephone has been NOTE: designed to operate on radio frequencies If you experience any problems with the which have been assigned to the normal use of your apparatus, you should exclusive use of cordless telephones. As...

  • Page 4: Before Initial Use

    Handset Cover (p. 11) Belt Clip (p. 75) Operating Instructions Part No. PQKK10091Z2 Part No. PQKE10071Z2 Part No. PQQX12226Z Optional accessories Please contact your nearest Panasonic dealer for the following options. Model No. Description KX-TCA105EC Handset KX-TCA110EB Charger HHR-P03H...

  • Page 5: For Best Performance

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 5 For Best Performance Battery Charge Rechargeable Ni-Cd batteries power the handset. Install the batteries (p. 11) and charge them for about 4 hours before initial use (p. 13). Base Unit Location Calls are transmitted between the base unit and the handset using wireless radio waves. For...

  • Page 6: Table Of Contents

    KX-TCD965EC-1(2~25) 99.12.6 10:36 PM Page 6 Contents Calling Back from the Caller Chapter 1 List ...........31 Preparation Editing the Caller’s Phone Number ..........31 Location of Controls ......8 Storing Caller List Information Displays ..........10 in the Phonebook......32 Settings ..........11 Clearing Caller List Information ..33 Installing the Batteries in the Using the Phonebook ......34...
  • Page 7 KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 7 Other Programmable Settings ..50 Selecting the Stand-By Mode Display ..........67 Setting the Key Tones......50 Setting the Range Warning Bell Selection........68 Alarm ..........50 Intercom ..........70 Setting the Battery Low Alarm ..51 Intercom between the Handset(s) Selecting the Talk Mode Display ..51...

  • Page 8: Location Of Controls

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 8 Location of Controls Base unit CALLER ID Indicator (p. 29) Display (p. 10) ANSWER ON Button and Indicator (p. 54) Memo Button (p. 56) Button (p. 19, 56) ERASE Stop Button (p. 19, 55) GREETING Button (p.

  • Page 9: Kx-Tcd965Ec-1(2~25) 99.9.27 8:05 Pm

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 9 Handset Display (p. 11) Intercom Button I NT (p. 38) Talk Button (p. 26, 27) (I, OKH, G, F) Navigator Key (p. 14, 20, 26, 28, 30, 36, 42) Function Button (p. 14, 20, 35, 40, 42)

  • Page 10: Displays

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 10 Displays Base unit display The clock needs adjusting (p. 22). Your greeting message was not recorded correctly. Record it again (p. 19). The unit is in the answering system programming mode. The speaker volume level is set to “5”. You can select 9 levels (0–8) while using the answering system (p.

  • Page 11: Settings

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 11 Handset Display AB CD E F GHI a b c d e f g 1234567890123456 Icons The call prohibition icon is displayed The in-range icon indicates that the handset is in range of the base unit. It when this mode is turned on (p.

  • Page 12: Connections

    “Telephone Network Voltage”. TNV* USE ONLY WITH Panasonic AC ADAPTOR KX-TCA11E. Be careful not to confuse the telephone line jack with the AC adaptor jack on the base unit. If connected improperly, the base unit will not work and damage may occur.

  • Page 13: Battery Charge

    15 seconds, recharge the batteries. 3 New Calls 3 New Calls Base 1 Battery information After your Panasonic batteries are fully charged: Operation Approx. Ni-Cd battery life (Included) Approx. Ni-MH battery life (Optional)* While in use (Talk) Up to about 6 hours...

  • Page 14: Turning The Power On

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 14 Settings Turning the Power ON Press firmly. You can choose whether to display the base unit number, handset number or no display in After all possible configurations briefly appear, the stand-by mode by programming (p. 67).

  • Page 15: Selecting The Dialling Mode

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 15 Selecting the Dialling Mode You can program the dialling mode to tone or pulse. If you have touch tone service, set to tone. If rotary or pulse service is used, set to pulse. The factory preset is tone.

  • Page 16: Selecting The Handset Ringer Volume/Pattern

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 16 Settings Selecting the Handset Ringer Volume/Pattern You can program the desired handset ringer volume and pattern. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode. Ringer volume Ringer pattern 7 levels are available.

  • Page 17: Selecting The Base Unit Ringer Volume/Pattern

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 17 Selecting the Base Unit Ringer Volume/Pattern You can program the desired base unit ringer volume and pattern. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.

  • Page 18: Setting The Auto Talk Feature

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 18 Settings Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing . If you want to use this feature, turn the feature ON. The factory preset is OFF.

  • Page 19: Preparing The Answering System

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 19 Preparing the Answering System Greeting Message You can record a personal greeting message. If a greeting message is not recorded, one of two pre-recorded greetings will be played when a call is received. All messages (greeting, incoming, memo, etc.) are stored in digital memory (p. 55). The total recording time is approximately 15 minutes.

  • Page 20: Programming Summary For The Answering System

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 20 Preparing the Answering System Programming Summary for the Answering System You can program function items using the handset near the base unit. See the corresponding pages for function details. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
  • Page 21 KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 21 If “ ” flashes on the handset display and an alarm tone sounds, move closer to the base unit and try again. You can exit the programming mode any time by pressing When programming is completed, a confirmation tone sounds.** If 6 beeps sound on the base unit during programming, a wrong key was pressed.

  • Page 22: Time And Day Adjustment

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 22 Preparing the Answering System Time and Day Adjustment Voice Time/Day Stamp: During playback, a synthesised voice will announce the time and day that each message was recorded. In step 7, you cannot enter numbers greater Press than 12.

  • Page 23: Selecting The Caller's Recording Time

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 23 Selecting the Caller’s Recording Time You can select “1 minute”, “unlimited” or “greeting only” for the caller’s recording time. The factory preset is “unlimited”. You can exit the programming mode any time Press by pressing Press G G or F F until the arrow points to “Program”, then press OKH H .

  • Page 24: Selecting The Number Of Rings

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 24 Preparing the Answering System Selecting the Number of Rings You can select the number of times the unit rings before the answering system answers a call, from 2 to 7 or AUTO (for Toll Saver*). The factory preset is AUTO.

  • Page 25: Setting The Vox Sens Function

    KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 25 Setting the VOX SENS Function The VOX SENS function is preset is 1 (HIGH). If the unit continues to operate after a caller hangs up or there are long pauses between or after messages, set to 2 (LOW).

  • Page 26: Making Calls

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 26 Making Calls Make sure that the power is ON (p. 14). If “ ” flashes and an alarm tone sounds after pressing , move closer to the Press base unit. Then try again. “...
  • Page 27 KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 27 To redial the last number dialled To store a redial number in the phonebook Press While the desired number is displayed, Press press While “Save Phonebook” is at the H R e d i a l...

  • Page 28: Answering Calls

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 28 Answering Calls Make sure that the power is ON (p. 14), otherwise the handset will not ring. If you subscribe to a Caller ID service, the calling party information will be displayed after the first ring (p.

  • Page 29: Caller Id Service

    KX-TCD965EC-2(26~41) 99.12.6 10:39 PM Page 29 Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. After subscribing to a Caller ID service, the calling party’s information will be displayed after the first ring.

  • Page 30: Using The Caller List

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 30 Using the Caller List Viewing the Caller List Information of up to 50 different callers is sorted from the most recent to the oldest call in the Caller List. When the 51st call is received the oldest call is deleted. Each caller’s phone number, the time and day received are shown.

  • Page 31: Calling Back From The Caller List

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 31 Calling Back from the Caller List Press Press The displayed phone number is dialled Press G or F until the arrow points to automatically. “Caller ID”. To hang up, press or place the Press handset on the base unit.

  • Page 32: Storing Caller List Information In The Phonebook

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 32 Using the Caller List Storing Caller List Information in the Phonebook You can store phone numbers that are in the Caller List in the phonebook. You can also select a separate ring tone for callers by setting “Private ring” (p. 34).

  • Page 33: Clearing Caller List Information

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 33 Clearing Caller List Information You can clear some or all of the entries in the Caller List. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.

  • Page 34: Using The Phonebook

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 34 Using the Phonebook You can store up to 70 names and phone numbers in the phonebook. All phonebook items are sorted by the first word in alphabetical order. Using the phonebook, you can make a call by selecting a name on the display.

  • Page 35: If You Make A Mistake While Entering A Name

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 35 To enter names selecting characters The dialling buttons can be used to enter letters and character symbols. The letters are printed on the dialling buttons. Pressing each button selects a character as shown below.

  • Page 36: Finding Items In The Phonebook

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 36 Using the Phonebook Finding Items in the Phonebook Press G or F to enter the phonebook. To search for a name by initial The first item is displayed. Press G or F to enter the phonebook.

  • Page 37: Editing An Item In The Phonebook

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 37 Editing an Item in the Phonebook Press G or F until the desired name is Add a number to the current number. displayed. Pressing I erases the digit to the You can also search for the item by initial left of the cursor.

  • Page 38: Intercom

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 38 Intercom A 2-way intercom is available between the handset and the base unit. Paging the base unit from the Paging the handset from the handset base unit (Handset locator) Handset: Using this feature, you can locate a misplaced...

  • Page 39: Special Features

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 39 Special Features How to Use the Pause Feature (For Analogue PBX Line/Long Distance Service Users) We recommend you insert “Pause” if a pause is required for dialling with a PBX or to access a long distance service.

  • Page 40: Setting The Key Lock

    KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 40 Special Features Setting the Key Lock You can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is cancelled. When the unit is in the stand-by mode, press and hold until a beep sounds.

  • Page 41: Call Waiting And Caller Id Compatible

    The earth relay can be installed as an option depending on your PBX requirements. Please consult your nearest Panasonic Service Center for installation. Then you can select the time break recall or earth mode. The factory preset is time break recall.

  • Page 42: Summary Of Programmable Functions

    KX-TCD965EC-3(42~53) 99.12.13 7:05 PM Page 42 Summary of Programmable Functions You can program the following function items using the handset near the base unit. The display shows the instructions. See the corresponding pages for function details. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.

  • Page 43: Display (P

    KX-TCD965EC-3(42~53) 99.12.13 7:05 PM Page 43 <Function menu> H K e y T o n e O N / O F F To set the key tone (p. 50) To select the handset ringer volume (p. 16) R i n g e r V o l u m e To select the handset ringer pattern (p.

  • Page 44: Setting The Password

    Enter the correct password. You can exit the programming mode any time by pressing Once you have programmed the password, you cannot confirm it. We recommend you write down the password. If you forget it, please consult your nearest Panasonic Service Centre.

  • Page 45: On The Base Unit

    The factory preset is 0000. you cannot confirm it. We recommend you write down the password. If you forget it, please consult your nearest Panasonic I n p u t C o m m a n d 5 ---- ----...

  • Page 46: Direct Call

    KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 46 Direct Call You can easily make a call using a stored direct call number by pressing . Incoming calls can still be accepted. To use this feature, store the direct call number and turn on the mode by programming.

  • Page 47: Call Prohibition

    : ---- Enter the handset password (p. 44). If you forget your handset password, please The current mode is displayed. consult your nearest Panasonic Service Centre. Press G or F to select ON. Press A confirmation tone sounds and “...

  • Page 48: Call Restriction

    KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 48 Call Restriction You can restrict desired handset(s) from dialling selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialled out. For example, if “00” is assigned as the call restriction number, international calls cannot be made.
  • Page 49 KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 49 When you dial a restricted number, To cancel the call restriction the call is disconnected, the dialled number number(s) flashes. Follow steps 1 to 9 on page 48. In step 10, Ex. The restricted number is “00”.

  • Page 50: Other Programmable Settings

    KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 50 Other Programmable Settings Setting the Key Tones You can choose whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. Press While “Key Tone ON/OFF” is at the...

  • Page 51: Setting The Battery Low Alarm

    KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 51 Setting the Battery Low Alarm You can choose whether or not the handset will sound a battery low alarm. The factory preset is ON. Press G or F to select ON or OFF. Press...

  • Page 52: Clearing The Settings In Memory

    KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 52 Clearing the Settings in Memory On the handset This function enables the handset to clear the following settings at one time. They will return to their initial settings. Function Initial setting Function Initial setting...
  • Page 53 KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 53 On the base unit This function enables the base unit to clear the following settings at one time. They will return to their initial settings. Function Initial setting Function Initial setting Bell selection All handsets...

  • Page 54: Answering System

    KX-TCD965EC-4(54~62) 99.9.27 8:00 PM Page 54 Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller’s message is recorded. The total recording time (including the greeting message) is approximately 15 minutes. A maximum of 64 messages (including the greeting message) can be recorded.

  • Page 55: Listening To Messages

    KX-TCD965EC-4(54~62) 99.9.27 8:00 PM Page 55 Listening to Messages You can see the total number of recorded messages on the base unit display. If the ANSWER ON indicator flashes, new messages have been recorded. Listening to only the new messages Press briefly.

  • Page 56: Erasing Messages

    KX-TCD965EC-4(54~62) 99.9.27 8:00 PM Page 56 Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New messages cannot be recorded when: — “Memory is full” is heard. — The number of messages displayed on the base unit flashes rapidly.

  • Page 57: Remote Operation From A Touch Tone Phone

    KX-TCD965EC-4(54~62) 99.9.27 8:00 PM Page 57 Remote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone. To operate the unit remotely, you must first store your remote code using the handset near the base unit (p.

  • Page 58: Setting The Remote Code

    KX-TCD965EC-4(54~62) 99.9.27 8:00 PM Page 58 Remote Operation from a Touch Tone Phone Setting the Remote Code The remote code prevents unauthorised people from accessing your unit and listening to your messages. Choose any 3-digit number (000–999). The remote code is not preset.

  • Page 59: Voice Menu

    KX-TCD965EC-4(54~62) 99.9.27 8:00 PM Page 59 Voice Menu The shaded boxes are voice prompts. Press 1 to play back All message playback. all messages. All recorded messages are played back. At the Press Press 2 for other end of the last message, “End of final message” and functions.

  • Page 60: Direct Remote Operation

    KX-TCD965EC-4(54~62) 99.9.27 8:00 PM Page 60 Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. Hang up anytime to end the remote operation.

  • Page 61: Remote Operation With The Handset

    KX-TCD965EC-4(54~62) 99.9.27 8:01 PM Page 61 To continue the remote operation When listening to your messages remotely, the unit will stop playback every 2 minutes and 40 seconds and you will hear two beeps. To continue playback, press within 10 seconds after the beeps. If you do not press within that time, the unit will hang up.

  • Page 62: Recording Your Telephone Conversation Using The Handset

    KX-TCD965EC-4(54~62) 99.9.27 8:01 PM Page 62 Remote Operation with the Handset Direct commands NEW MESSAGE PLAYBACK ERASING A SPECIFIC MESSAGE Only new messages are played (During playback) The current message is erased. back. A short beep will sound and the ALL MESSAGE PLAYBACK next message will be played.

  • Page 63: For Optional Multi-Unit Users

    The optional handset model number is KX-TCA105EC. The functions of the optional handset are the same as those of the KX-TCD965EC handset. An optional charger, KX-TCA110EB, is available from your Panasonic dealer. Operating More than One Base Unit You can register and operate your handset at up to 4 base units.

  • Page 64: Registration

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 64 Registration Registering a Handset in the Base Unit You must register the handset in the base unit before use. Charge the optional handset batteries for approximately 4 hours before initial use. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.

  • Page 65: Selecting The Base Unit Access

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 65 Selecting the Base Unit Access Automatic base unit access (Auto) The handset automatically selects a registered base unit. When the handset moves to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit.

  • Page 66: Cancelling A Handset

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 66 Registration Cancelling a Handset Each handset can cancel itself or another handset. Press Enter the handset number(s) you want to cancel. Press G or F until the arrow points to The selected handset number(s) flash(es).

  • Page 67: Selecting The Stand-By Mode Display

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 67 Selecting the Stand-By Mode Display You can choose whether to display the currently connected base unit number, handset number or no display while in the stand-by mode. The factory preset is the base unit number.

  • Page 68: Bell Selection

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 68 Bell Selection There are three choices for bell selection. When a call is being received: — all handsets ring. “All handsets” — the selected handset(s) ring(s). “Specified handset(s)” — the selected handset rings first, then if it does not answer, all other handsets will ring. “First handset”...

  • Page 69: Selecting All Handsets

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 69 Selecting first handset Press A confirmation tone sounds. One handset will ring first, then all other The display will return to “Setting handsets will ring if the first handset is not Base”. To return to the stand-by mode, answered.

  • Page 70: Intercom

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 70 Intercom Intercom between the Handset(s) and the Base Unit A 2-way intercom is available between one of the handsets and the base unit when another handset is not having an outside call. The base unit user can page the handset users individually or at one time.

  • Page 71: Intercom Between Handsets

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 71 Intercom between Handsets A 2-way intercom is available between handsets. Ex. Handset 1 is paging Handset 2. Handset 1: Handsets 1 and 2: Press I N T To end the intercom, press Handset 1: Enter the desired handset number.

  • Page 72: Transferring A Call From One Handset To Another

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 72 Intercom Transferring a Call from One Handset to Another The intercom can be used during a call, enabling you to transfer a call between handsets registered to the same base unit. Transferring a call using the...

  • Page 73: Conference

    KX-TCD965EC-5(63~73) 99.9.27 7:58 PM Page 73 Conference During a call using the handset, you can make an intercom call to another handset and then combine the calls together to establish a conference call between handsets registered to the same base unit.

  • Page 74: Replacing The Batteries

    Ni-MH battery: For about 8 hours Discard defective batteries as soon as possible. Defective batteries may leak into the unit. Please use only Panasonic P-03H or P-P03S batteries. If the rechargeable batteries are not inserted correctly, the handset will not work.

  • Page 75: Using The Belt Clip

    KX-TCD965EC-6(74~84) 99.9.27 7:59 PM Page 75 Caution: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the batteries specified. 2. Do not use non-rechargeable batteries. 3. Do not mix old and new batteries.

  • Page 76: Before Requesting Help

    KX-TCD965EC-6(74~84) 99.9.27 7:59 PM Page 76 Before Requesting Help Cordless Telephone Problem Remedy “ ” flashes and an alarm tone sounds You are too far from the base unit. Move closer and when you press try again. Plug in the AC adaptor.
  • Page 77 KX-TCD965EC-6(74~84) 99.9.27 7:59 PM Page 77 Problem Remedy While programming or searching, the To answer the call, press . Start again from unit starts to ring and stops the the beginning after hanging up. program/search. The unit does not display the caller’s Other telephone equipment may be interfering with phone numbers.
  • Page 78 KX-TCD965EC-6(74~84) 99.9.27 7:59 PM Page 78 Before Requesting Help Answering System Problem Remedy The answering system is on, but The recording time is set to “greeting only”. Select incoming messages are not recorded. “1 minute” or “unlimited” (p. 23). Memory is full. Erase some or all of the messages (p.
  • Page 79 KX-TCD965EC-6(74~84) 99.12.10 5:48 PM Page 79 General Remedy Problem Turn the power ON (p. 14). The unit does not work. Check the settings (p. 11–18). Charge the batteries fully (p. 13). Clean the charge contacts and charge again (p. 13).

  • Page 80: Safety Instructions

    KX-TCD965EC-6(74~84) 99.9.27 7:59 PM Page 80 Safety Instructions Take special care to follow the safety suggestions listed below. Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit.

  • Page 81: Adding Another Phone

    KX-TCD965EC-6(74~84) 99.9.27 7:59 PM Page 81 Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use a T-adaptor. To B.T. Socket T-Adaptor Telephone Line Cord Standard Telephone Important Notice Concerning the Correct Use and Charging of Ni-Cd (Ni-MH) Batteries Batteries, due to their construction, undergo some wear and tear.

  • Page 82: Term Definitions

    99.9.27 7:59 PM Page 82 Dear purchaser, You have acquired a KX-TCD965EC, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterised by high-security protection against interceptions as well as high-quality digital transmission.
  • Page 83 8. The guarantee period applicable to this product shall be 12 months. Please keep these Operating Instructions with your receipt. Panasonic Business Systems U.K. Receipt No. Date of Purchase Model No. KX-TCD965EC...
  • Page 84 92/31/EEC 93/68/EEC Customer Care Helpline Tel. No.: 08701 578577 Sales Department: Panasonic Business Systems U.K. Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP Manufacturer: Kyushu Matsushita Electric (U.K.) Ltd. Pencarn Way, Duffryn, Newport, South Wales, NP10 8YE, United Kingdom PQQX12226ZB-UK...

Table of Contents