Transferring A Call From One Handset To Another - Panasonic KX-TCD952BLB Operating Instructions Manual

KX-TCD952BL(E)34~42

Transferring a Call from One Handset to Another

The intercom can be used during a call, enabling you to transfer a call between handsets registered to
the same base unit.
Transferring a call using the
intercom
Ex. Handset 1 is transferring a call to
Handset 2.
1
Handset 1:
During a call, press
the desired handset number.
· The call is put on hold.
· You will hear an internal ring back tone
until the other handset is answered.
· If there is no answer, press
return to the call.
2
Handset 2:
When the unit rings, press
answer.
3
Transferring a call:
Handset 1:
Press .
· The transfer is completed.
Handset 2 can answer the call.
OR
Ending the intercom:
Handset 1:
Press .
I N T
· Handset 1 returns to the call.
18/4/00 15:06 Page 41
. Then enter
I NT
to
I NT
to
Transferring a call without the
intercom
This feature enables you to transfer the call to
another handset without waiting for the paged
handset to answer.
Ex. Handset 1 is transferring a call to
Handset 2.
1
Handset 1:
During a call, press
desired handset number. Then press
to transfer the call.
· The call is put on hold.
2
Handset 2:
When the unit rings, press
answer the call.
· The transfer is completed.
· If the paged handset is not answered within 30
seconds, a ring tone sounds at the paging
handset. The paging handset can return to the
call by pressing .
and enter the
I N T
to
41