Sensor Plate (Inlet) - Oki OKIPAGE 10e Service Manual

Page: 42
Service Guide OKIPAGE 10e
Chapter 3 Disassembly

3.3.17 Sensor Plate (Inlet)

(1) Remove the upper cover (see 3.3.1).
(2) Remove the eject roller assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the lower base unit (see 3.3.5).
(5) Press the clamps of three sensor plates (inlet and paper) (1), and remove them by pressing them upward from the
bottom.