Lcd Status Message List - Oki OKIPAGE 10e Service Manual

4.3.1 LCD Status Message List

The listing of the status's and problems displayed in the form of messages on the LCD or PC display is provided in Table
4-1.
Classification LCD Status Message
Jam error
(feeding)
Jam error (ejection)
Paper size error
Tray paper out
Paper size request
( JAM error )
Service Guide OKIPAGE 10e
Chapter Product Accessory 3: High Capacity 2nd Paper Feeder
Table 4-1
Description
Notifies of occurrence of jam
while the paper is being fed from
High Capacity Second Paper
Feeder.
Notifies of occurrence of jam
while the paper is being ejected
from the printer.
Notifies of incorrect size paper
feeding from High Capacity
Second Paper Feeder.
Notifies of no paper state of the
High Capacity Second Paper
Feeder.
Notifies of correct paper size for
the High Capacity Second Paper
Feeder.
Page: 144
Recovery method
Check the paper in the High
Capacity Second Paper Feeder.
Carry out the recovery printing by
opening and closing the cover, and
turn the error display off. When the
problem occurs frequently, go
through the Troubleshooting.
Check the paper in the printer.
Carry out the recovery printing by
opening and closing the cover, and
turn the error display off.
Check the paper in the High
Capacity Second Paper Feeder.
Also check to see if there was a
feeding of multiple sheets. Carry
out the recovery printing by
opening and closing the cover, and
turn the error display off.
Load the paper in High Capacity
Second Paper Feeder.
Load the requested size paper in
the High Capacity Second Paper
Feeder.