Stepping Motor (Hopping) - Oki OKIPAGE 10e Service Manual

Page: 138
Service Guide OKIPAGE 10e
Chapter Product Accessory 3: High Capacity 2nd Paper Feeder

3.3.1 Stepping Motor (Hopping)

(1) Turn the printer power switch off, pull out the AC cord from the outlet. Remove the printer off High Capacity Second
Paper Feeder.
(2) Take the paper cassette assy (1) out of High Capacity Second Paper Feeder.
(3) Remove six screws (2) and remove the upper plate (3). Remove two screws (5) and remove the hopping frame assy
(6).
(4) Remove the front cover assy (4) off the guide boss on the guide L (2nd) assy (7) by bending the guide L (2nd) assy
(7) in the direction of arrow shown in the magnified view below.
(5) Pull the sheet guide assy (8) in the direction of arrow a and also push in the direction of arrow (b) to unlock the
notch, and bring the sheet guide assy (8) in the direction of arrow (c) to remove the sheet guide assy (8).