Sensor Plate (Inlet) - Oki OKIPAGE 14e Service Manual

3.3.17 Sensor Plate (Inlet)

(1) Remove the upper cover (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the lower base unit (see 3.3.5).
(5) Press the clamps of three sensor plates (inlet and paper) 1, and remove them by pressing them
upward from the bottom.
1
1
Sensor plate (paper)
Sensor plate (inlet)
1
Sensor plate (inlet)
62 /
41605601TH Rev.2