(5) Cyclical defect
Image Drum
Developing roller
Toner supply roller
Charging roller
Cleaning roller
Transfer roller
Heat roller
Back-up roller
Note: After replacing the image drum cartridge, set the printer to the user maintenance mode by turning the power on
while pressing the MENU key, and reset the drum counter (see Printer Handbook).
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIPAGE 10e
Frequency
3.71" (94.2mm)
1.86" (47.12mm)
2.96" (75.27mm)
1.21" (30.63mm)
0.93" (23.56mm)
1.95" (49.6mm)
2.44" (62.0mm)
2.73" (69.4mm)
Chapter 6 Troubleshooting
Remedy
Clean or replace the image drum unit.
Replace the image drum unit.
Replace the image drum unit.
Replace the image drum unit.
Replace the image drum unit.
Replace the image drum unit.
Replace the heat roller.
Replace back-up roller.
Page: 86