Adjusting Calfpad Height; Adjusting Calfpad Depth - Invacare AX3 Owner's Operator And Maintenance Manual

Hide thumbs Also See for AX3:

Table of Contents

SECTION 6—FRONT RIGGINGS

3. If necessary, repeat STEPS 1‐2 to adjust remaining footplate height.

Adjusting Calfpad Height

1. Loosen the mounting bolt and washer that secure the calfpad bracket to the elevating

legrest assembly.

2. Slide the calfpad bracket up or down until the desired calfpad height is obtained.

3. Tighten the mounting bolt and washer securing the calfpad bracket to the elevating

legrest assembly.

4. If necessary, repeat STEPS 1‐3 to adjust remaining calfpad bracket.

1. Remove the mounting screw, spacer and locknut that secure the calfpad to the calfpad

bracket.

2. Insert mounting screw through one of four calfpad bracket mounting holes.

3. Using the mounting screw spacer and locknut, secure the calfpad to the calfpad bracket.

4. If necessary, repeat STEPS 1‐3 to adjust remaining calfpad assembly.

Calfpad

Locknut

Calfpad Bracket Mounting Holes

FIGURE 6.5 Adjusting Elevating Legrest Height and Calfpad Height/Depth

™

AX3

Wheelchair

Spacer

Calfpad Bracket

Mounting Bolt and Washer

Elevating Legrest Assembly

Mounting Screw

Locknut and Washer

Slide Tube

Footplate

Part No 1143216

Table of Contents