Adjusting Footplate Height And Calfpad Height/Depth - Invacare Solara 3G User Manual

10.5 Adjusting Footplate Height and Calfpad Height/Depth

Adjusting the Footplate Height
1. Loosen locknut and washer securing the slide tube to the elevating
legrest.
2. Reposition footplate to desired height securely tighten locknut and
washer.
3. If necessary, repeat STEPS 1-2 to adjust remaining footplate height.
Adjusting Calfpad Height
1. Loosen the mounting bolt and washer that secure the calfpad
bracket to the elevating legrest assembly.
2. Slide the calfpad bracket up or down until the desired calfpad height
is obtained.
3. Tighten the mounting bolt and washer securing the calfpad bracket
to the elevating legrest assembly.
4. If necessary, repeat STEPS 1-3 to adjust remaining calfpad bracket.
Adjusting Calfpad Depth
1. Remove the mounting screw, spacer and locknut that secure the
calfpad to the calfpad bracket.
2. Insert mounting screw through one of four calfpad bracket
mounting holes.
3. Using the mounting screw spacer and locknut, secure the calfpad to
the calfpad bracket.
4. If necessary, repeat STEPS 1-3 to adjust remaining calfpad assembly.
Part No 1154295
Calfpad
Spacer
Calfpad Bracket
Mounting Holes
Locknut
FIGURE 6 Adjusting Footplate Height and Calfpad Height/Depth
87
Invacare® Solara®3G/Spree 3G Wheelchair
10 FRONT RIGGINGS
Calfpad Bracket
Mounting Bolt and
Washer
Elevating Legrest
Assembly
Mounting Screw
Locknut and Washer
Slide Tube
Footplate