Inspect/Adjust Periodically - Invacare AX3 Owner's Operator And Maintenance Manual

❑ Ensure all hardware is tight.
❑ Ensure hand grips are not loose.
❑ Ensure casters are free of debris.

Inspect/Adjust Periodically

❑ Wheelchair rolls straight (no excessive drag or pull to one side).
❑ Arms are secure but easy to release and adjustment levers engage properly.
❑ Adjustable height arms operate and lock securely.
❑ Armrest pad sits flush against arm tube.
❑ All fasteners on clothing guards are secure.
❑ Seat and/or back upholstery have no rips.
❑ Inspect adjustable angle back attaching hardware is securely tightened.
❑ No excessive side movement or binding when rear wheels are lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling finish.
❑ Inspect tires/casters for flat spots and wear.
❑ Check pneumatic tires for proper inflation (recommended tire pressure is listed on the
side wall of the tire).
❑ Wheel lock pivot point are free of wear and looseness.
❑ Clean upholstery and armrests.
❑ Sealed bearings and axle nut tension are correct.
❑ Wheel/fork assembly has proper tension when caster is spun. Caster should come to
a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Wheel bearings are clean and free of moisture.
❑ Wheel locks are easy to engage.
❑ Clean quick‐release axles with a Teflon lubricant.
❑ Ensure axles are free from dirt, lint, etc.
❑ Ensure roller bearings are free from dirt, lint, etc.
❑ Adjust wheel locks as tires wear.
❑ Clean and wax all parts.
❑ Ensure casters are free of debris.
❑ Check that all labels are present and legible. Replace if necessary.
Part No 1143216
SECTION 3—SAFETY INSPECTION
23 ™
AX3 Wheelchair