1. Fold the wheelchair.
2. Remove the mounting screws that secures the seat upholstery to the front and back
seat rails.
3. Remove the endcaps from the front of the seat rails.
4. Slide the seat upholstery out of the seat rails.
Seat Upholstery
Endcaps
Removing/Installing Standard Back Upholstery
NOTE: For this procedure, refer to FIGURE 8.3.
Removing Back Upholstery
NOTE: To Install the Back Upholstery, reverse this procedure.
1. Remove the back canes. Refer to Removing Back Canes on page 40.
2. Remove the mounting screw that secures the back upholstery to the back canes. Refer
to Detail "A".
3. Remove the back upholstery from the back canes. Refer to Detail "B".
Mounting Screw
Back Cane
FIGURE 8.3 Removing/Installing Standard Back Upholstery
Part No 1143216
Seat Rails
Mounting
Screws
FIGURE 8.2 Removing/Installing Seat Upholstery
DETAIL "A"
Mounting
Screw
DETAIL "B"
Upholstery
41
SECTION 8—SEAT/BACK
Mounting Screw
(hidden from view)
Back
Canes
™
AX3
Wheelchair