Other Protocols - LevelOne Infinity IES-0880 User Manual

Other Protocols

GVRP
GVRP Global Setting:
1. GVRP: C GVRP drop-down menu from GVRP drop-down list to choose Enable or Disable
to enable or disable GVRP (GARP VLAN Registration Protocol).
2. Dynamic VLAN creation: C
creation drop-down list to choose Enable or Disable to enable or disable Dynamic VLAN
creation. GARP (Generic Attribute Registration Protocol) provides IEEE802.1Q compliant VLAN
pruning and dynamic VLAN creation on IEEE802.1Q trunk ports.
3. Update Setting: C
Per port setting (include LAG):
1. GVRP: C GVRP drop-down menu from GVRP drop-down list to choose Enable or Disable
to enable or disable GVRP for the port.
2. GVRP applicant: C
to choose Active or Normal to the port. Ports in the GVRP active applicant state send GVRP
VLAN declarations when they are in the STP (Spanning Tree Protocol) blocking state, which
prevents the STP bridge protocol data units (BPDUs) from being pruned from the other port.
Ports in the GVRP normal applicant state do not declare GVRP VLANs when in the STP blocking
state.
3. GVRP registration: C
down list to choose Enable or Disable to enable or disable GVRP registration to the port.
Configuring an IEEE802.1Q trunk port in registration mode allows dynamic creation (if dynamic
VLAN creation is enabled), registration, and deregistration of VLANs on the trunk port.
4. Update Setting: Click Update Setting button when you finished Per port setting.
IES-0880 User Manual
Dynamic VLAN creation drop-down menu from Dynamic VLAN
Update Setting button when you finished GVRP Global Setting.
GVRP applicant drop-down menu from GVRP applicant drop-down list
GVRP registration drop-down menu from GVRP registration drop-
Page 58