Snmp - LevelOne Infinity IES-0880 User Manual

SNMP

SNMP General Setting
1. SNMP Status: C
to choose Enable or Disable to enable or disable SNMP.
2. Description:
3. Location:
4. Contact:
5. Trap Community Name: For each Trap Community Name ,
Community Name textbox and specify a trap community name.
6. Trap Host IP Address: For each Trap Host IP Address ,
textbox and specify a trap host IP address.
7. Cold Start Trap: C
down list to choose Enable or Disable to enable or disable cold start trap.
8. Warm Start Trap: C
drop-down list to choose Enable or Disable to enable or disable warm start trap.
9. Link Down Trap: C
down list to choose Enable or Disable to enable or disable link down trap.
10. Link Up Trap: C
to choose Enable or Disable to enable or disable link up trap.
11. Authentication Failure Trap: C
Authentication Failure Trap drop-down list to choose Enable or Disable to enable or
disable authentication failure trap.
12. Topology Change Trap: C
IES-0880 User Manual
SNMP Status drop-down menu from SNMP Status drop-down list
Description textbox and specify a new description for SNMP.
Location textbox and specify a new location for SNMP.
Contact textbox and specify a new contact for SNMP.
Cold Start Trap drop-down menu from Cold Start Trap drop-
Warm Start Trap drop-down menu from Warm Start Trap
Link Down Trap drop-down menu from Link Down Trap drop-
Link Up Trap drop-down menu from Link Up Trap drop-down list
Authentication Failure Trap drop-down menu from
Topology Change Trap drop-down menu from Topology
Trap
Trap Host IP Address
Page 51