Table of Contents
Advertisement
3. Command Syntax:
dot1x timeout re-authperiod SECS
no dot1x timeout re-authperiod
SECS <1-4294967295> Specify the seconds between reauthorization attempts. The
default time is 3600 seconds.
4. Example:
The following example specifies to set the interval 25 seconds between reauthorization
attempts:
switch_a(config)#interface fe1
switch_a(config-if )#dot1x timeout re-authperiod 25
switch_a(config-if )#
IES-0880 User Manual
Page 125
Advertisement
Table of Contents
