Radius Configuration - LevelOne Infinity IES-0880 User Manual

802.1x

Radius Configuration

1. Radius Status: C
list to choose Enable or Disable to globally enable or disable authentication.
2. Update Setting: C
Add Radius:
1. Add Radius: C
2. Radius Server IP:
remote radius server host.
3. Radius Server Port:
destination port for authentication requests. The host is not used for authentication if
set to 0.
4. Secret Key:
encryption key for all radius communications between the Switch and radius server.
This key must match the encryption used on the radius daemon. All leading spaces are
ignored, but spaces within and at the end of the key are used. If spaces are used in the
IES-0880 User Manual
Radius Status drop-down menu from Radius Status drop-down
Update Setting button when you finished Radius Status Setting.
Add Radius button. The Radius Server Setting window appears.
Radius Server IP textbox and specify the IP address of the
Radius Server Port textbox and specify the UDP
Secret Key textbox and specify the authentication and
Page 55