Mstp Properties - LevelOne Infinity IES-0880 User Manual

MSTP Properties

1. STP Version: C
drop-down list.
2. Region Name: C
name to it. MST bridges of a region form different spanning trees for different VLANs.
By default, each MST bridge starts with the region name as its bridge address. This
means each MST bridge is a region by itself, unless specifically added to one.
3. Revision Level: C
information. The default value of revision number is 0.
4. Max Hops: C
in an MST region. This parameter is used by all the instances of the MST. Specifying the
max hops for a BPDU prevents the messages from looping indefinetely in the network.
When a bridge receives a MST BPDU that has exceeded the allowed max-hops, it
discards the BPDU.
5. Update setting: C
setting.
IES-0880 User Manual
STP Version drop-down menu to choose MSTP from STP Version
Region Name
Revision Level
Max Hops
Update setting button when you finished MSTP Properties
to create an MST region and specify a
to specify the number for configuration
to specify the maximum allowed hops for BPDU
Page 41