Dvtt36 Log Placement - Empire Comfort Systems DVLT series Installation Instructions And Owner's Manual

Direct vent zero clearance gas fireplace
Table of Contents

Advertisement

13. Place the Left Branch (J) on the left pin of the Left Rear Log
(E) and the pin on the Left Ember Burner Chunk. The end of
the log will rest on the left log grate bar.
14. Place the Center Branch (K) between the two middle log
grate bars on the middle pin on the Left Rear Log (E).
15. Place the Right Branch (L) onto the right pin on the Left Rear
Log (E) and the top of the Center Ember Chunk (H). The end
of the log will "float" and touch the log grate bar on the right.
Page 32

DVTT36 LOG PLACEMENT

16. Place the Right Top Branch (M) on the pins on the Center
Branch (K) and on the Right Branch (L).
17. After all logs are properly positioned, place small "dime size"
pieces of Rockwool (ember material) in the shaded area on
the burner as shown in Figure 48.
Ember Placement - 36" Burner
Figure 48
31259-3-0114

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents