Dvlt36 And Dvlt42 Glass Media Installation; Dvtt42 Log Placement - Empire Comfort Systems DVLT series Installation Instructions And Owner's Manual

21. After all logs are properly positioned, place small "dime size"
pieces of Rockwool (ember material) in the shaded area on
the burner as shown in Figure 50.
Ember Placement - 42" Burner

DVLT36 AND DVLT42 GLASS MEDIA INSTALLATION

Installation of the glass media is critical to safe and clean op-
eration of the fireplace.
Note: Before installing the glass media, see Accent Lamp Light
Replacement section on page 54 of this manual for bulb place-
ment.
31259-3-0114

DVTT42 LOG PLACEMENT

Figure 50
BURNER COVER
PILOT GUARD
MEDIA BASKET
1. Remove the mesh screen and the glass frame assembly.
2. Place the pilot guard around the pilot.
3. Place the glass media around the Accent Burner. Fill the me-
dia basket until the glass media covers the burner with only
one layer of glass. Do not place any of the glass media inside
the pilot guard.
4. Remaining glass media should be placed in front of the burner
cover for added ambience when accent light is on.
FRONT BURNER
Figure 51
Page 37