Setting The Device Communications - Genie GSD106 User Manual

2. Multi Dome Connection
When connecting multiple domes together you can embed them in a multi-device system with auxiliary
connection to devices, such as surge protectors, video matrixes, DVR's and alarm boxes.
AC24V: Power supply for the dome, which converts 220V/50H
RS-485 Bus: Is for the control signal (RS-485 signal) output of a controller - connected to the communication
input terminals of the control cable of each dome.
Video: Is for image signal output of each dome (can be directly output to video equipment, such as a monitor,
DVR or video matrix.
II. Setting the Device Communications
Before installation and use, the settings for the communication protocol and transmission speed (baud rate)
should match those used by the control system.
input to an AC24V output.
Z
3