Language Options; Display Options - Genie GSD106 User Manual

<2> All sub-menus can be seen in this tree list

1.Language Options

<<Language Options

2.Display Options

<<Display Options
2.1.Preset Setup
<<Preset Setup Options
① Number
<<Preset Number Selection
1~255
001
↑
0 1 2 3 4 5 6 7 8 9
IRIS CLOSE when done
② Set Preset
<<Set Preset
STORED
IRIS CLOSE when done
③ Call Preset
<<Call Preset
Select the number to be called. Joystick Up/Down to select the Call Preset Menu. Joystick Left/Right or
press IRIS OPEN and the camera moves to corresponding Preset number.
(English/Espanol/Polski)
1
Jovstick Left/Right to select
Press IRIS OPEN or Jovstick Left/Right to enter
Press IRIS OPEN or Jovstick Left/Right to enter
<<The default number after entering is 001 (hundred bit/ten
bit/single bit). Joystick Left/Right to select the Preset position and
press IRIS OPEN to confirm. Joystick Left/Right again to select
numbers (0~~9). Press IRIS OPEN to confirm the selection.
Press IRIS CLOSE to exit to the upper level menu when
programming is complete.
Press IRIS OPEN or Jovstick Left/Right to enter
Move the cursor to select the Preset position. Press IRIS CLOSE
to finalise your selection. The screen displays STORED and
returns to the previous menu.
Press IRIS OPEN or Joystick Left/Right to enter
10