Chapter 2 Dome Wiring And Setup; Wiring The Dome - Genie GSD106 User Manual

Chapter 2 - Wiring and Setup of Dome System
I. Wiring the Dome
1 Basic System Connection
The basic system connections are shown below. When using this product for the first time, please read and
carefully follow this electrical wiring schematic as incorrect wiring may lead to permanent damage of the dome or
damage of other attached equipment.
Description for Alarm Function:
No.1 Alarm Input: Red and White
No.2 Alarm Input: Yellow and White
No.3 Alarm Input: Grey and White
No.4 Alarm Input: Orange and White
No.5 Alarm Input: Brown
No.6 Alarm Input: Green and White
No.7 Alarm Input: Brown and White
No.8 Alarm Input: Blue and White
No.8 Alarm Input: Grey and White
No.1 Alarm Constant ON Output NO1): Blue and Green
No.1 Alarm Output Public Terminal COM1): Blue
No.2 Alarm Constant ON Output NC2): Brown and Green
No.2 Alarm Output Public Terminal COM2): Green
BNC Video Output
Red
Black
Orange RS485A (+)
Yellow RS485B (-)
Yellow-Green
Yellow-Green
External Connection for Alarm Input/Output
Alarm Input Public Terminal COM1): Black/White
Display
AC24V Input
Power Supply of Dome
Controller of
the Dome
The brown stranded
wire with alarm input wire
is the alarm system ground
2
Connected to
Ground