Table of Contents
Advertisement
Chapter 4 – Operation Menu
I.
Operating Instructions
<1>. Menu Operation Instructions
1. Input a Tilt movement command for cursor movement and option selection, namely the controller moves the
Joystick up and down; hereinafter called Joystick Up/Down
2. Input a Pan movement command for entering into an option or for changing a setting value, namely the
controller moves the Joystick left and right; hereinafter called Joystick Left/Right
3. Input an Iris Open command for confirming setup or for changing value(s), namely the controller initiates an
IRIS OPEN command; hereinafter called Press IRIS OPEN
4. Input an Iris Close command to cancel a setting or to Exit, namely the controller initiates an IRIS CLOSE
command; hereinafter called Press IRIS CLOSE
<2>. To Input a Numeric Value
1. Move the Joystick Left/Right for the cursor to select the numeric value to be entered.
2. Press IRIS OPEN to confirm, and the number selected is displayed; as indicated in the pictures below.
3. Move the Joystick Left/Right to select the next number to be entered.
4. Press IRIS OPEN to confirm, the selected number is displayed in the corresponding data bit.
5. Press IRIS CLOSE to confirm and exit when complete.
001
0 1 2 3 4 5 6 7 8 9
IRIS CLOSE when done
.
<3>. To Input a Character
1. Move the Joystick Left/Right for the cursor to select the character to be entered.
2. Press IRIS OPEN to confirm, and the character selected is displayed; as indicted in the pictures below.
3. Move the Joystick Left/Right to select the next character to be entered.
4. Press IRIS OPEN to confirm, the character is displayed in the corresponding data bit.
5. Input other characters, as required by repeating the above procedure.
6. Press IRIS CLOSE to save and exit when complete.
1~255
1~255
001
0 1 2 3 4 5 6 7 8 9
IRIS CLOSE when done
8
Advertisement
Table of Contents
